P0919

Factory Manual References

Factory service manual diagnostic procedure for 2013 audi s8

37 Event Memory Entries In Diagnostic Address 0081(P17E6-00; P0919-00; P18CB-00) And Diagnostic Address 0002(P085D-00) (GROUP 37, NO. 24-23)

Publication date: 2024-08-27
Reference number: GROUP 37, NO. 24-23
Supersedes refnos: (2074733/2)

37 EVENT MEMORY ENTRIES IN DIAGNOSTIC ADDRESS 0081(P17E6-00; P0919-00; P18CB-00) AND DIAGNOSTIC ADDRESS 0002(P085D-00)

37 EVENT MEMORY ENTRIES IN DIAGNOSTIC ADDRESS 0081(P17E6-00; P0919-00; P18CB-00) AND DIAGNOSTIC ADDRESS 0002(P085D-00)

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 37, NO. 24-23 (2074733/2), Date of Issue:  August 27, 2024
AUDI: All Models
GROUP: 37 - Automatic Transmission - Controls, Case

CONDITION

REVISION HISTORY

Revision Date Purpose
2 - Revised Header  (Added Model years)
Revised Service  (Adjusted SVM table)
1 07/31/2024 Initial publication

Customer statement: 

Selector lever fault shown in instrument cluster. Gears cannot be selected.

Workshop findings: 

Selector lever fault shown in instrument cluster.

The following DTCs and symptom code(s) are stored in Gear Selector Lever -J587-,(address word 0081):

  • DTC P17E600:  Selector lever position sensor implausible signal; symptom 2003

    and/or 

  • DTC P091900:  Selector lever error; symptom 5031

    and/or 

  • DTC P18CB00:  Button for parking lock implausible signal; symptom 3003

The following DTC and symptom code is stored in TCM -J217-, (address word 0002):

  • DTC P085D00:  Selector lever malfunction; symptom 22351.

TECHNICAL BACKGROUND

Diagnosis of voltage evaluation leads to event memory entry.

PRODUCTION SOLUTION

Not applicable

SERVICE

Please note that charging the high-voltage battery during a software update can cause damage to the high-voltage components.

Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 

Update the -J587- (0081) using the SVM action code as listed in the table below, if necessary:

SOFTWARE INFORMATION

Model Diagnostic Address Old Software Part Number Old Software Version New Software Part Number (or higher) New Software Version (or higher) SVM Code Input
2019A6/A7 0081 4K1713041H 0050 4K1713041M 0056 81A003
2020A6/A7 4K1713041H 0051 4K1713041M 0056
2021A6/A7 4K1713041K 4K1713041M
S6/RS6 4K1713041J 4K1713041L
S7/RS7 4K1713041J 4K1713041L

Claims for replaced parts will not be reimbursed.

The 0081 control unit software needs to be updated on this vehicle. Explain to the customer that various control units must be reconfigured after the software update to ensure that they function correctly in conjunction with other control units in the vehicle. Components which have been retrofitted in the vehicle but have not been entered in the vehicle equipment list via feedback documentation (version compare) to the SVM may not function correctly after the configuration process. Ask the customer whether he/she has had non-genuine components retrofitted on the vehicle or modifications carried out by third parties (e.g. tuning) or is aware of any such retrofits or modifications. Inform the customer that, if non-genuine retrofits or modifications have been carried out on the vehicle by third parties, neither AUDI AG nor your own company will accept liability for any damage that may be caused by updating the software, or by failing to do so. Make a note to this effect on the job order before it is signed by the customer and put the information in the customer file.

WARRANTY

WARRANTY INFORMATION

Claim Type: 
  • If the vehicle is outside of any warranty, this TechnicalService Bulletin is informational only.
Service Number:  3785
Damage Code:  0039
Labor Operations:  Software update 0151 0000 Time statedon thediagnosticprotocol
Charge battery 2706 8950 See SRT with associated operations
Claim Comment:  As per TSB 2074733/2

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty.

ADDITIONAL INFORMATION

All part and service references provided in this TSB (2074733) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.

©2024 Audi of America, Inc.  All rights reserved. The information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

Battery General Information

Diagram

Battery Types

Diagram

Amplifier for Telephone Connector End View (R86)

Diagram

Amplifier for Telephone Connector End View (R86, T2fv, T2fw, T4cm)

Diagram

Amplifier for Telephone Connector End View (R86, T2fv, T4cm, T2fw)

Diagram

Auxiliary Heater Control Module Connector End View (J364, T6ap, T2ia)

Location

4.0L - MULTIPORT Fuel Injection - Engine Code(S): CEUA & CGTA

Location

4.0L - MULTIPORT Fuel Injection - Engine Code(S): CEUA, CGTA, CTFA & CTGA

Location

Antilock Brake System

Location

Automatic Transmission - Final Drive & Differential

Fuse/Relay

27 48V Reference: Charging 48V Battery With 12V Charger DTC P0A7D00/P0B2900 (GROUP 27, NO. 24-71)

Fuse/Relay

27 48V Reference: Charging 48V Battery With 12V Charger DTC P0A7D00/P0B2900 (GROUP 27, NO. 24-71)

Fuse/Relay

74 Damage Assessment Guidelines For Textile Seat Covers (GROUP 74, NO. 25-28)

Fuse/Relay

All Models, Dynamic Compression Test Using DSO Function (CTT 00-14-01)

Related Procedures

Procedure

BLUETOOTH Disabling While Performing Module Updates (CTT 01-14-03)

Procedure

57 AUDI Advanced Key Inoperative (GROUP 57, NO. 23-08)

Procedure

All Models, 02 Sensor DTCS (CTT 01-14-01)

Procedure

BLUETOOTH Disabling While Performing Module Updates (CTT 01-14-03)

Procedure

BLUETOOTH Disabling While Performing Module Updates (CTT 01-14-03)

Procedure

BLUETOOTH Disabling While Performing Module Updates (CTT 01-14-03)