01 Mil On; DTC P2004, P2005, P2006, P2007, P2011, P2014, P2015, P2070, Or P2071 Stored In The ECM (GROUP 01, NO. 18-62)
Reference number: GROUP 01, NO. 18-62
Supersedes refnos: 2050329/1, 2050329/2, GROUP 01, NO. 18-52
01 MIL ON; DTC P2004, P2005, P2006, P2007, P2011, P2014, P2015, P2070, OR P2071 STORED IN THE ECM
TECHNICAL SERVICE BULLETIN
| AUDI: | S4 2012, 2014-2015; SQ5 2015-2016; S5, S5 Cabriolet 2014-2016; A6, A7, and Q7 2012-2016 |
| GROUP: | 01 - On-Board Diagnostic |
APPLICABLE MODELS AND YEARS
01 18 62 2050329/2 March 27, 2018. Supersedes Technical Service Bulletin Group 01 number 18-52 dated February 5, 2018 for reasons listed below.
| Model(s) | Year | VIN Range | Vehicle-Specific Equipment |
|---|---|---|---|
| S4 | 2012, 2014 - 2015 | All | 3.0 TFSI |
| SQ5 | 2015 - 2016 | All | 3.0 TFSI |
| S5, S5 Cabriolet | 2014 - 2016 | All | 3.0 TFSI |
| A6, A7, and Q7 | 2012 - 2016 | All | 3.0 TFSI |
CONDITION
| Revision | Date | Purpose |
|---|---|---|
| 2 | - | Revised header data (Updated models) |
| 1 | 02/05/2018 | Initial publication |
Customer states:
- MIL on
Workshop findings:
One of the following DTCs is stored in the engine control module (ECM), J623 (address word 0001):
- DTC P200400 (Intake Manifold Runner Control Bank 1 Stuck Open)
- DTC P200500 (Intake Manifold Runner Control Bank 2 Stuck Open)
- DTC P200600 (Intake Manifold Runner Control Bank 1 Stuck Closed)
- DTC P200700 (Intake Manifold Runner Control Bank 2 Stuck Closed)
- DTC P201100 (Intake Manifold Runner Bank 2 Control Circuit/Open)
- DTC P201400 (Intake Manifold Runner Position Sensor/Switch Circuit)
- DTC P201500 (Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance)
- DTC P207000 (Intake Manifold Tuning (IMT) Valve Stuck Open)
- DTC P207100 (Intake Manifold Tuning (IMT) Valve Stuck Closed)
TECHNICAL BACKGROUND
Vacuum controlled water pump may draw excessive vacuum causing intake manifold flaps to malfunction. Replacement vacuum hose with restrictor limits vacuum draw.
PRODUCTION SOLUTION
Improved vacuum hose in production.
SERVICE
- Replace vacuum hose between coolant pump and solenoid valve with updated part 06E 133 714 AA. Delete fault memory and perform test drive.
- If no faults return, then the vehicle is repaired. If faults return, follow GFF instructions.
WARRANTY
| Claim Type: |
|
||
| Service Number: | 2483 | ||
| Damage Code: | 0050 | ||
| Labor Operations: | Remove and install vacuum hose | 2483 1999 | 40 TU |
| Diagnostic Time: | GFF | 0150 0000 | Time stated on diagnostic protocol (Max 20 TU) |
| Road test prior to service procedure | 0121 0002 | No allowance | |
| Road test after service procedure | 0121 0004 | 10 TU | |
| Claim Comment: | As per TSB #2050329/2 | ||
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty.
REQUIRED PARTS AND TOOLS
Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
| Part Number | Part Description | Quantity |
|---|---|---|
| 06E133714AA | Connecting hose | 1 |
ADDITIONAL INFORMATION
ALL PARTS AND SERVICE REFERENCES PROVIDED IN THIS TSB (2050329) ARE SUBJECT TO CHANGE AND/OR REMOVAL.
©2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher.