B1152

Factory Manual References

Factory service manual diagnostic procedure for 2012 acura zdx

A L L Diagnostic Trouble Codes ( DTC )

B1152




DTC Troubleshooting: B1152

DTC B1152:

Gauge Control Module Internal (EEPROM) Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0), and then back to ON (II), or press the engine start/stop button to select the OFF mode and then the ON mode.

3. Check for DTCs with the HDS.

Is DTC B1152 indicated?

YES -

Replace the gauge control module Service and Repair.

NO -

Intermittent failure, the system is OK at this time.

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

A/C Leak Detection (B07-025)

Location

Accessory Power Sockets

Location

Active Damper System

Location

ACURALINK

Location

Adaptive Cruise Control (Acc)

Fuse/Relay

B18-020: Warranty Extension: Customer Support Program For Driver's Airbag Inflator For 2013-14 ILX Hybrid And Other Listed Years And Models (Expires February 28, 2026) (B18-020)

Fuse/Relay

2012 ZDX: TQI And New Model Service Information (11-019)

Fuse/Relay

2012 ZDX: TQI And New Model Service Information (11-019)

Fuse/Relay

2012 ZDX: TQI And New Model Service Information (11-019)

Related Procedures

Procedure

A/C Refrigerant (Compressor) Oil Guide (BJA34004)

Procedure

A/C Refrigerant And Oil Type Guide (BJA1330)

Procedure

A/C Refrigerant Type Guide (BJA11220)

Procedure

A/C Refrigerant Types Guide (BJA09917 VERSION 2)

Procedure

Drive Belt Squeaks (10-035)

Procedure

Always Enter Campaign Number On Proof Of Correction Certificate (B13010B)

← Back to 2012 acura zdxBrowse vehicle codesDIY Repair Guides