01 Mil On (P1057 And/Or P1060 Stored In ECM) (GROUP 97, NO. 11-29)
Publication date: 2011-12-05
Reference number: GROUP 97, NO. 11-29
Supersedes refnos: 2027455
01 MIL ON (P1057 AND/OR P1060 STORED IN ECM)
Reference number: GROUP 97, NO. 11-29
Supersedes refnos: 2027455
01 MIL ON (P1057 AND/OR P1060 STORED IN ECM)
TECHNICAL SERVICE BULLETIN
Reference Number(s): GROUP 97, NO. 11-29 (2027455/1), Date of Issue:
December 5, 2011
| AUDI: | R8 V10 2009 - 2011 |
| GROUP: | 97 - Electrical Wiring |
Service Information
97 11 29 2027455/1 December 5, 2011
| Model(s) | Year | VIN Range | Vehicle-Specific Equipment |
|---|---|---|---|
| R8 V10 | 2009 - 2011 | 000001 - 999999 | BUJ Engine Code |
Condition
Customer statement: Engine warning light on.
Entry: P1057 and/or P1060 Exhaust camshaft control circuit, bank 1 and/or bank 2, open circuit.
Workshop findings: On the plug the camshaft adjuster the wire terminal is broken off (Figure 1).
Technical Background
Mechanical load (vibrations) on the wire terminal.
Production Solution
Not Applicable.
Service
- Replace both terminals in the plug with the repair cable 000 979 019 E. As a result, the cable cross section is reduced from 1.0mm2 to 0.5mm2 , minimizing the load on the contact because of the lower cable mass.
- Place the two crimp connectors 000 979 941
in the area shown in Figure 2, green circle.
Warranty
| Claim Type: | Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. | ||
| Service Number: | 9752 | ||
| Damage Code: | 0015 | ||
| Labor Operations: | R8 Coupe - Cover remove + reinstall | 1083 1901 | 30 TU |
| R8 Spyder - Conv. Top box cover remove + reinstall | 6190 1900 | 50 TU | |
| Repair engine wiring harness | 9709 4152 | 40 TU | |
| Diagnostic Time: | GFF | 0150 0000 | Time stated on diagnostic protocol (Max 20 TU) |
| Road test prior to service procedure | No allowance | 0 TU | |
| Road test after service procedure | 0121 0004 | 10 TU | |
| Technical diagnosis at dealer's discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) |
|||
| Claim Comment: | As per TSB #2027455/1 | ||
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual . Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
| Part Number | Part Description | Quantity |
|---|---|---|
| 000 979 019 E | Repair cable with terminal | Order number required |
| 000 979 941 | Crimp connector | Order number required |
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.