B1152

Factory Manual References

Factory service manual diagnostic procedure for 2009 acura mdx

A L L Diagnostic Trouble Codes ( DTC )

B1152




DTC Troubleshooting: B1152

DTC B1152: Gauge Control Module Internal (EEPROM) Error

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back ON (II).

3. Wait for more than 6 seconds.

4. Check for DTCs with the HDS.

Is DTC B1152 indicated?
YES - Replace the gauge control module. Service and Repair

NO - Intermittent failure, the system is OK at this time.


Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

A/C Leak Detection (B07-025)

Location

CHRYSLER Group LLC

Location

CHRYSLER Group LLC

Location

ACURA

Location

AUDI

Fuse/Relay

Climate Control

Fuse/Relay

CHRYSLER Group LLC

Fuse/Relay

AUDI

Fuse/Relay

BMW

Related Procedures

Procedure

A/C Refrigerant (Compressor) Oil Guide (BJA34004)

Procedure

A/C Refrigerant And Oil Type Guide (BJA1330)

Procedure

A/C Refrigerant Type Guide (BJA11220)

Procedure

A/C Refrigerant Types Guide (BJA09917 VERSION 2)

Procedure

Drive Belt Squeaks (10-035)

Procedure

Always Enter Campaign Number On Proof Of Correction Certificate (B13010B)

← Back to 2009 acura mdxBrowse vehicle codesDIY Repair Guides