P0726
Factory Manual ReferencesFactory service manual diagnostic procedure for 2008 audi a4
01J, Continuously Variable Transmission (CVT)
Notes on Diagnostic Trouble Codes 17110 / P0726 - 01J, Continuously Variable Transmission (CVT)
^ An implausible RPM signal is being received by the TCM over the RPM lead. The cause could be, for example, engine RPM too high or false RPM readings caused by interference from the ignition system. The substitute engine RPM signal is then transmitted by the ECM over the Controller Area Network (CAN) bus circuit to the TCM.
01J Transmission
Supporting Diagrams & Locations
Reference material from the factory manual for this diagnostic procedure.
Location
00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)
Location
00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)
Location
00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)
Location
00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)