B1152

Factory Manual References

Factory service manual diagnostic procedure for 2008 acura tsx

A L L Diagnostic Trouble Codes ( DTC )

B1152

DTC B1152: Gauge Control Module EEPROM Error

1. Clear the DTCs using the HDS.
2. Start the engine.
3. Check for DTCs by selecting the DTCs MENU (DTCs) from the HDS.

Is DTC B1152 indicated?

YES - Faulty gauge control module; replace the gauge control module.

NO - Intermittent failure, the gauge control module is OK at this time. Check pinfits and connections. If the connections are good, check the battery condition, and the charging system.

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

A/C Leak Detection (B07-025)

Diagram

A/C Leak Detection (B07-025)

Location

ACURA

Location

AUDI

Location

BENTLEY

Location

BMW

Fuse/Relay

AUDI

Fuse/Relay

BMW

Fuse/Relay

Buzzers, Relays & Timers

Fuse/Relay

Check Out The Latest Word On A/T Flushing (B08010A)

Related Procedures

Procedure

A/C Refrigerant (Compressor) Oil Guide (BJA34004)

Procedure

A/C Refrigerant And Oil Type Guide (BJA1330)

Procedure

A/C Refrigerant Type Guide (BJA11220)

Procedure

A/C Refrigerant Types Guide (BJA09917 VERSION 2)

Procedure

Always Enter Campaign Number On Proof Of Correction Certificate (B13010B)

Procedure

Can't Turn Off The VSA? Check If The TPMS Indicator Is On (B08040C)

← Back to 2008 acura tsxBrowse vehicle codesDIY Repair Guides