B1050

Factory Manual References

Factory service manual diagnostic procedure for 2008 acura rl

A L L Diagnostic Trouble Codes ( DTC )

B1050

DTC B1050: Communication Bus Line Error

DTC B1150: Communication Bus Line Error

DTC B1200: Communication Bus Line Error

DTC B1250: Communication Bus Line Error

DTC B1400: Communication Bus Line Error

DTC B1600: Communication Bus Line Error

DTC B1750: Communication Bus Line Error

DTC B1800: Communication Bus Line Error

DTC B2100: Communication Bus Line Error

DTC B2150: Communication Bus Line Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.

Are DTCs B1050, B1150, B1200, B1250, B1400*, B1600, B1750, B1800, B2100, and/or B2150 indicated? (* : '05-06 models)

YES - Go to step 5.

NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections at the MICU and B-CAN connected units in the table.

5. Check for DTCs with the HDS.

Factory service manual diagram





Is DTC B1000 also indicated?

YES - Troubleshoot DTC B1000.

NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections at the MICU and B-CAN connected units in the table.

B1150

DTC B1050: Communication Bus Line Error

DTC B1150: Communication Bus Line Error

DTC B1200: Communication Bus Line Error

DTC B1250: Communication Bus Line Error

DTC B1400: Communication Bus Line Error

DTC B1600: Communication Bus Line Error

DTC B1750: Communication Bus Line Error

DTC B1800: Communication Bus Line Error

DTC B2100: Communication Bus Line Error

DTC B2150: Communication Bus Line Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.

Are DTCs B1050, B1150, B1200, B1250, B1400*, B1600, B1750, B1800, B2100, and/or B2150 indicated? (* : '05-06 models)

YES - Go to step 5.

NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections at the MICU and B-CAN connected units in the table.

5. Check for DTCs with the HDS.

Factory service manual diagram





Is DTC B1000 also indicated?

YES - Troubleshoot DTC B1000.

NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections at the MICU and B-CAN connected units in the table.

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

A/C Leak Detection (B07-025)

Location

CHRYSLER Group LLC

Location

CHRYSLER Group LLC

Location

ACURA

Location

AUDI

Fuse/Relay

CHRYSLER Group LLC

Fuse/Relay

AUDI

Fuse/Relay

BMW

Fuse/Relay

CHRYSLER Group LLC

Related Procedures

Procedure

A/C Refrigerant (Compressor) Oil Guide (BJA34004)

Procedure

A/C Refrigerant And Oil Type Guide (BJA1330)

Procedure

A/C Refrigerant Type Guide (BJA11220)

Procedure

A/C Refrigerant Types Guide (BJA09917 VERSION 2)

Procedure

Always Enter Campaign Number On Proof Of Correction Certificate (B13010B)

Procedure

Can't Turn Off The VSA? Check If The TPMS Indicator Is On (B08040C)

← Back to 2008 acura rlBrowse vehicle codesDIY Repair Guides