B1002

Factory Manual References

Factory service manual diagnostic procedure for 2008 acura mdx

A L L Diagnostic Trouble Codes ( DTC )

B1001

DTC B1001: MICU Internal (CPU) Error

DTC B1002: MICU Internal (EEPROM) Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0), and then back ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.

Is DTC B1001 and/or B1002 indicated?

YES - Faulty MICU, replace the under-dash fuse/relay box.

NO - Intermittent failure, the system is OK at this time.

B1002

DTC B1001: MICU Internal (CPU) Error

DTC B1002: MICU Internal (EEPROM) Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0), and then back ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.

Is DTC B1001 and/or B1002 indicated?

YES - Faulty MICU, replace the under-dash fuse/relay box.

NO - Intermittent failure, the system is OK at this time.

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

A/C Leak Detection (B07-025)

Location

CHRYSLER Group LLC

Location

CHRYSLER Group LLC

Location

ACURA

Location

AUDI

Fuse/Relay

Climate Control

Fuse/Relay

CHRYSLER Group LLC

Fuse/Relay

AUDI

Fuse/Relay

BMW

Related Procedures

Procedure

A/C Refrigerant (Compressor) Oil Guide (BJA34004)

Procedure

A/C Refrigerant And Oil Type Guide (BJA1330)

Procedure

A/C Refrigerant Type Guide (BJA11220)

Procedure

A/C Refrigerant Types Guide (BJA09917 VERSION 2)

Procedure

Always Enter Campaign Number On Proof Of Correction Certificate (B13010B)

Procedure

Dead Battery, 2.5 Amp Draw? Check For A Bad Power Seat Switch (100100C)

← Back to 2008 acura mdxBrowse vehicle codesDIY Repair Guides