P0703

Factory Manual References

Factory service manual diagnostic procedure for 2007 audi a4

01J, Continuously Variable Transmission (CVT)



DTC 17087 / P0703 - 01J, Continuously Variable Transmission (CVT)

Factory service manual diagram




Note on DTC 17087 / P0703:
^ Conditions for DTC recognition: The signals from the brake light switch and the brake test switch are transmitted over the CAN bus circuit to the Transmission Control Module (TCM) and evaluated there. After 10 consecutive occurrences of an implausibility between the brake light switch and the brake test switch (one switch actuated, the other not) this DTC is saved in the Transmission Control Module (TCM).

01J, Continuously Variable Transmission (CVT)



DTC 17087 / P0703 - 01J, Continuously Variable Transmission (CVT)

Factory service manual diagram




Note on DTC 17087 / P0703:
^ Conditions for DTC recognition: The signals from the brake light switch and the brake test switch are transmitted over the CAN bus circuit to the Transmission Control Module (TCM) and evaluated there. After 10 consecutive occurrences of an implausibility between the brake light switch and the brake test switch (one switch actuated, the other not) this DTC is saved in the Transmission Control Module (TCM).

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)