P1740

Factory Manual References

Factory service manual diagnostic procedure for 2006 audi a4

01J Transmission






DTCs through DTC 18149/P1741

DTC 18148 / P1740:

Factory service manual diagram



01J, Continuously Variable Transmission (CVT)



DTC 18148 / P1740 and DTC 18149 / P1741 - 01J, Continuously Variable Transmission (CVT)

Factory service manual diagram




Notes on DTC 18148 / P1740:
^ The DTC is displayed when clutch temperature is too high.
^ Engine torque is automatically cut back until the temperature has fallen into the permissible operating range again.

Note on DTC 18149 / P1741:
^ If this DTC occurs intermittently (display SP), the DTC memory must be deleted. Afterward, the vehicle must be taken for a test drive and the DTC memory read again. If the DTC recurs, the hydraulic unit must be replaced.

01J, Continuously Variable Transmission (CVT)



DTC 18148 / P1740 and DTC 18149 / P1741 - 01J, Continuously Variable Transmission (CVT)

Factory service manual diagram




Notes on DTC 18148 / P1740:
^ The DTC is displayed when clutch temperature is too high.
^ Engine torque is automatically cut back until the temperature has fallen into the permissible operating range again.

Note on DTC 18149 / P1741:
^ If this DTC occurs intermittently (display SP), the DTC memory must be deleted. Afterward, the vehicle must be taken for a test drive and the DTC memory read again. If the DTC recurs, the hydraulic unit must be replaced.

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)