P0757

Factory Manual References

Factory service manual diagnostic procedure for 2005 audi allroad

01L, 5 Speed A/T AWD



DTC 17141 / P0757

Factory service manual diagram




Note for DTC 17141 / P0757
^ Short circuit to plus is already checked when the ignition is switched on. During driving, all fault possibilities are going to be recognized.

01V, 5 Speed A/T



DTC 17141 / P0757

Factory service manual diagram




1) First check harness connectors for contact corrosion and water ingress, replace if necessary. If there are malfunctions indicated for solenoid valves, pay particular attention to the 16-pin harness connector at transmission between valve body and cable harness.

2) Pay attention to which hydraulic control the transmission has when selecting measuring value block. For a more detailed description; Refer to "Read measuring value block".

01L, 5 Speed A/T AWD



DTC 17141 / P0757

Factory service manual diagram




Note for DTC 17141 / P0757
^ Short circuit to plus is already checked when the ignition is switched on. During driving, all fault possibilities are going to be recognized.

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

2.7L Turbo

Diagram

4.2L

Diagram

2.7L Turbo

Diagram

4.2L

Diagram

2.7L Turbo

Diagram

4.2L

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

57 Vehicle Locking System, Diagnostic Information (GROUP 57, NO. 24-65)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)