P0730

Factory Manual References

Factory service manual diagnostic procedure for 2004 audi tt

01J, Constantly Variable Transmission (CVT)



Factory service manual diagram




P0730 Monitoring gear ratio; Wrong transmission ratio

01J, Constantly Variable Transmission (CVT)



P0730

Factory service manual diagram




Note on DTC 17111 / P0727:
^ In the event of an open circuit in the RPM lead, the substitute engine RPM signal is transmitted by the Engine Control Module (ECM) over the CAN bus circuit to the Transmission Control Module (TCM).

01J, Constantly Variable Transmission (CVT)



P0730

Factory service manual diagram




Note on DTC 17111 / P0727:
^ In the event of an open circuit in the RPM lead, the substitute engine RPM signal is transmitted by the Engine Control Module (ECM) over the CAN bus circuit to the Transmission Control Module (TCM).

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

← Back to 2004 audi ttGeneral P0730 InfoDIY Repair Guides