P0727

Factory Manual References

Factory service manual diagnostic procedure for 2004 audi allroad

01J, Constantly Variable Transmission (CVT)



DTC 17111 / P0727

Factory service manual diagram




Note on DTC 17111 / P0727:
^ In the event of an open circuit in the RPM lead, the substitute engine RPM signal is transmitted by the Engine Control Module (ECM) over the CAN bus circuit to the Transmission Control Module (TCM).

01J, Constantly Variable Transmission (CVT)



P0730

Factory service manual diagram




Note on DTC 17111 / P0727:
^ In the event of an open circuit in the RPM lead, the substitute engine RPM signal is transmitted by the Engine Control Module (ECM) over the CAN bus circuit to the Transmission Control Module (TCM).

01J, Constantly Variable Transmission (CVT)



DTC 17111 / P0727

Factory service manual diagram




Note on DTC 17111 / P0727:
^ In the event of an open circuit in the RPM lead, the substitute engine RPM signal is transmitted by the Engine Control Module (ECM) over the CAN bus circuit to the Transmission Control Module (TCM).

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

2.7L Turbo

Diagram

4.2L

Diagram

2.7L Turbo

Diagram

4.2L

Diagram

2.7L Turbo

Diagram

4.2L

Location

ACURA

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

Airbag Or Pyrotechnic Safety Belt Deployment, Inquiries (GROUP 69, NO. 97-03)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Related Procedures

Procedure

Adjusting door component carrier

Procedure

Adjusting door component carrier

Procedure

Adjusting door component carrier

← Back to 2004 audi allroadBrowse vehicle codesDIY Repair Guides