B1175

Factory Manual References

Factory service manual diagnostic procedure for 2004 acura tsx

A L L Diagnostic Trouble Codes ( DTC )

B1175

DTC B1175: Fuel Gauge Sending Unit Signals Input Error

1. Do the fuel gauge sending unit test.

Is the fuel gauge sending unit OK ?

YES - Go to step 2.

NO - Replace the fuel gauge sending unit.

2. Disconnect the fuel pump/fuel gauge sending unit 5P connector and the gauge control module connector B (18P).

Factory service manual diagram



3. Check for continuity between the No.16 and No.17 terminals of gauge control module connector B (18P) and No.land No.2 terminals of the fuel pump/fuel gauge sending unit 5P connector.

Is there continuity?

YES - Go to step 4.

NO - Repair an open in the BLK/WHT or YEL/BLK wire between the gauge control module and fuel gauge sending unit.

Factory service manual diagram



4. Check for continuity between the No.16 and No.17 terminals of gauge control module connector B (18P) and body ground.

Is there continuity?

YES - Repair a short to ground in the BLK/WHT or YEL/BLK wire.

NO - Replace the gauge control module.

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

A/C Leak Detection (B07-025)

Diagram

Diagrams

Diagram

Diagrams

Diagram

Diagrams

Diagram

Diagrams

Diagram

Diagrams

Location

CHRYSLER Group LLC

Location

CHRYSLER Group LLC

Location

ACURA

Location

AUDI

Fuse/Relay

CHRYSLER Group LLC

Fuse/Relay

AUDI

Fuse/Relay

BMW

Fuse/Relay

CHRYSLER Group LLC

Related Procedures

Procedure

A/C Refrigerant (Compressor) Oil Guide (BJA34004)

Procedure

A/C Refrigerant And Oil Type Guide (BJA1330)

Procedure

A/C Refrigerant Type Guide (BJA11220)

Procedure

A/C Refrigerant Types Guide (BJA09917 VERSION 2)

Procedure

Always Enter Campaign Number On Proof Of Correction Certificate (B13010B)

Procedure

Certain Vehicle Parts Are Marked With VIN (R Dot) (ASN0204-01)

← Back to 2004 acura tsxBrowse vehicle codesDIY Repair Guides