B1157
DTC B1157: Gauge Control Module Lost Communication with Multiplex Integrated Control Unit (MICU)
1. Clear the DTCs using the HDS.
2. Cycle the ignition switch to OFF and then back ON.
3. Check for DTCs by selecting the DTCs MENU (DTCs) from the HDS.
Is DTC B1157 indicated?
YES - Go to step 4.
NO - Intermittent failure. The gauge control system is OK at this time. Check pinfits and connections.
4. Check for DTCs by selecting the DTCs MENU (DTCs) from the HDS.
Is DTC B1055, B1106 and B1255 indicated?
YES - Go to Multiplex Integrated Control Unit Input Test.
NO - Go to Gauge Control Module Input Test.
1. Clear the DTCs using the HDS.
2. Cycle the ignition switch to OFF and then back ON.
3. Check for DTCs by selecting the DTCs MENU (DTCs) from the HDS.
Is DTC B1157 indicated?
YES - Go to step 4.
NO - Intermittent failure. The gauge control system is OK at this time. Check pinfits and connections.
4. Check for DTCs by selecting the DTCs MENU (DTCs) from the HDS.
Is DTC B1055, B1106 and B1255 indicated?
YES - Go to Multiplex Integrated Control Unit Input Test.
NO - Go to Gauge Control Module Input Test.