B1060

DTC Troubleshooting

B1060: Relay Control Module lost communication with Gauge Control Module (VSP/NE message)

1. Clear the DTCs using the Honda Diagnostic System (HDS).
2. Cycle the ignition switch OFF then ON.
3. Check for DTCs by selecting the DTCs MENU (DTCs) from the HDS.

Is DTC B1055, B1056, B1057, B1058, B1059, B 1060, B1061, B1062 and/or B1063 indicated?

YES - Go to step 4.

NO - Intermittent failure, the F-CAN communication line is OK at this time.

4. Check for DTCs other than those listed above. Are any other DTCs present?

YES - Go to step 5.

NO - Perform Relay Control Module Input Test.




5. Find the chart that contains at least one retrieved DTC in column A and one retrieved DTC in column B. Perform the input test for the ECU listed in that chart.
If no DTC from column B is found then continue to Relay Control Module input test.

DTC B1205: Climate Control Unit Lost Communication with the Gauge Control Module (VSP/NE messages)

1. Push the AUTO button.

Does the climate control turn on?

YES - Go to step 2.

NO - Go to climate control power and ground circuits troubleshooting.

2. Clear the DTCs using the HDS.
3. Turn the ignition switch OFF then ON.
4. Turn the climate control system on and operate several functions (A/C on/off, air mix and blend door operations, temperature settings etc.)
5. Check the DTCs by selecting the DTCs MENU (DTCs) from the HDS.

Is DTC B1205 B1206 and/or B1207 indicated?

YES - Go to step 6.

NO - Intermittent failure, the gauge control module and audio HVAC display panel are ok at this time.

6. Check the DTCs by selecting the DTCs MENU (DTCs) from the HDS.

Is DTC B1008 B1060 and/or B1061 indicated?

YES - Perform the gauge control module self test procedure.

NO - The climate control unit is faulty replace the audio HVAC display panel.