P0716

Factory Manual References

Factory service manual diagnostic procedure for 2003 audi a4

01J, Constantly Variable Transmission (CVT)

P0716 Sensor for transmission -G182-; Implausible Signal

Note on DTC 17100 / P0716:
^ Condition for DTC recognition: The Transmission Control Module recognizes short-term drive RPM which is higher than 7000 RPM.

01V, 5 Speed A/T

DTC 17100 / P0716

Note on DTC 17100 / P0716:
^ Condition for DTC recognition: One transmission position (D or S) has been positively engaged, not an intermediate position. Engine RPM while driving is higher than 608 RPM. Transmission output RPM while driving is higher than 416 RPM.
^ The DTC is displayed when the conditions for DTC recognition are met and transmission input RPM is equal 0 RPM or higher than 8000 RPM.

01J, Constantly Variable Transmission (CVT)

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)

Location

00 Software Version Management (SVM), Operating Instructions (GROUP 00, NO. 21-55)