P0711
Factory Manual ReferencesFactory service manual diagnostic procedure for 2002 audi s4
5 Spd. Automatic Transmission 01V
Diagnostic Trouble Codes 17095 / P0711 - 5 Spd. Automatic Transmission 01V
1) First check harness connectors for contact corrosion and water ingress, replace if necessary. If there are malfunctions indicated for solenoid valves, pay particular attention to the 16-pin harness connector at transmission between valve body and cable harness.
2) ATF temperature sensor -G93- is integrated in the wiring harness in the transmission (at valve body)
3) Pay attention to which hydraulic control the transmission has when selecting measuring value block.
Note for DTC 17095 / P0711:
^ Requirement for malfunction recognition: The transmission oil temperature does not increase after starting engine or makes temperature leaps.
01V, 5 Speed A/T
Supporting Diagrams & Locations
Reference material from the factory manual for this diagnostic procedure.
Diagram
2.7L Turbo
Diagram
2.7L Turbo
Diagram
2.7L Turbo
Diagram
2.7L Turbo
Location
1.8L (Engine Code: AMB)
Location
2.0L (Engine Codes: BGP, BWT)
Location
2.7L (2002 S4 - Engine Code: APB)
Location
3.0L (Engine Codes: AVK, BGN)
Related Procedures
Procedure
Aftermarket (Non-AUDI Brand) MOTOROLA V60 Phones, Installation Caution (GROUP 91, NO. 02-09)
Procedure
Aftermarket (Non-AUDI Brand) MOTOROLA V60 Phones, Installation Caution (GROUP 91, NO. 02-09)
Procedure
Aftermarket (Non-AUDI Brand) MOTOROLA V60 Phones, Installation Caution (GROUP 91, NO. 02-09)
Procedure
Aftermarket (Non-AUDI Brand) MOTOROLA V60 Phones, Installation Caution (GROUP 91, NO. 02-09)