B0712

Factory Manual References

Factory service manual diagnostic procedure for 1999 acura nsx

Always Refer To Applicable S/M When Adjusting Headlights (B07120C)

WARNING: This page is about the NSX Base, 3.0 NA1, which is a different variant/trim than selected.
Publication date: 2007-12-01
Reference number: B07120C

ALWAYS REFER TO APPLICABLE S/M WHEN ADJUSTING HEADLIGHTS

ALWAYS REFER TO APPLICABLE S/M WHEN ADJUSTING HEADLIGHTS

TECHNICAL SERVICE BULLETIN

Reference Number(s): B07120C, Date of Issue:  December 01, 2007
ACURA: ALL MODELS
CURRENTLY APPLIES TO: General Information

SERVICE INFORMATION

Whenever you're adjusting the headlights, always  refer to the procedure in the applicable S/M or in ISIS. Adjustment procedures can vary from model to model and from model year to model year, depending on what type of headlight is being used.

To show you what we mean, here are two S/M excerpts from different model year MDXs. The '03 MDX has a visually optically aligned left (VOL) style of headlight; you adjust the headlight below the headlight height. The '08 MDX has a visually optically aligned right (VOR) style of headlight; you adjust the cut line to the headlight's height.

Fig 1: Identifying Headlight Height Dimension
G05791801

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

Cavity Numbering System

Diagram

Cavity Numbering System

Diagram

Circuit Identification For In-Line and Fuse Box Connectors

Diagram

Cavity Numbering System

Diagram

Circuit Identification For In-Line and Fuse Box Connectors

Diagram

Cavity Numbering System

Location

CHRYSLER Group LLC

Location

CHRYSLER Group LLC

Location

ACURA

Location

AUDI

Fuse/Relay

Air Conditioning Torque Specifications

Fuse/Relay

CHRYSLER Group LLC

Fuse/Relay

AUDI

Fuse/Relay

BMW

Related Procedures

Procedure

A/C Refrigerant (Compressor) Oil Guide (BJA34004)

Procedure

A/C Refrigerant And Oil Type Guide (BJA1330)

Procedure

Certain Vehicle Parts Are Marked With VIN (R Dot) (ASN0204-01)

Procedure

ACURA Recommended Materials (B99-015)

Procedure

Always Install The ATF Filter Kit With The REMAN A/T (ASN0606-05)

Procedure

ATF Cooler Cleaner (89-015)