P0306

Factory Manual References

Factory service manual diagnostic procedure for 1999 acura cl

A L L Diagnostic Trouble Codes ( DTC )

Cylinder 1 Misfire

Part 1 Of 2:

Factory service manual diagram



Part 2 Of 2:

Factory service manual diagram



The scan tool indicates Diagnostic Trouble Code (DTC) P0301: Cylinder 1 misfire detected.

Description
Misfire detection is accomplished by monitoring the crankshaft speed with the crankshaft position (CKP) sensor which is attached to the crankshaft.
If misfiring strong enough to damage the catalyst is detected, the MIL will blink during the time of its occurrence, and DTC P0301, P0302, P0303, P0304, P0305 or P0306 will be stored. Then, after the misfire has ceased, the MIL will come on.
If misfiring that increases emissions is detected during two consecutive driving cycles, the MIL will come on, and DTC P0301, P0302, P0303, P0304, P0305 or P0306 will be stored.

NOTE: If some of the DTCs listed below are stored at the same time as a misfire DTC, troubleshoot those DTCs first, then troubleshoot the misfire DTC.

P0107, P0108, P1128, P1129: MAP Sensor
P0171, P0172: Fuel supply system
P0401, P1491, P1498: EGR system
P0505: Idle control system
P1259: VTEC System
P1361, P1362, P1366, P1367: TDC1/TDC2 sensor
P1519: IAC valve

Possible Cause
- Fuel injector clogging, fuel leakage, air leakage
- Fuel injector circuit open or shorted
- Spark plug carbon deposits, fouling, malfunction
- Ignition wires open, leaking
- Distributor malfunction
- Compression low
- Valve clearance out of specification

Cylinder 2 Misfire

Part 1 Of 2:

Factory service manual diagram



Part 2 Of 2:

Factory service manual diagram



The scan tool indicates Diagnostic Trouble Code (DTC) P0301: Cylinder 1 misfire detected.

Description
Misfire detection is accomplished by monitoring the crankshaft speed with the crankshaft position (CKP) sensor which is attached to the crankshaft.
If misfiring strong enough to damage the catalyst is detected, the MIL will blink during the time of its occurrence, and DTC P0301, P0302, P0303, P0304, P0305 or P0306 will be stored. Then, after the misfire has ceased, the MIL will come on.
If misfiring that increases emissions is detected during two consecutive driving cycles, the MIL will come on, and DTC P0301, P0302, P0303, P0304, P0305 or P0306 will be stored.

NOTE: If some of the DTCs listed below are stored at the same time as a misfire DTC, troubleshoot those DTCs first, then troubleshoot the misfire DTC.

P0107, P0108, P1128, P1129: MAP Sensor
P0171, P0172: Fuel supply system
P0401, P1491, P1498: EGR system
P0505: Idle control system
P1259: VTEC System
P1361, P1362, P1366, P1367: TDC1/TDC2 sensor
P1519: IAC valve

Possible Cause
- Fuel injector clogging, fuel leakage, air leakage
- Fuel injector circuit open or shorted
- Spark plug carbon deposits, fouling, malfunction
- Ignition wires open, leaking
- Distributor malfunction
- Compression low
- Valve clearance out of specification

Supporting Diagrams & Locations

Reference material from the factory manual for this diagnostic procedure.

Diagram

Cavity Numbering System

Diagram

Circuit Schematics

Diagram

Component Locations

Diagram

Components

Diagram

Connectors - "C"

Diagram

Diagrams

Location

CHRYSLER Group LLC

Location

CHRYSLER Group LLC

Location

ACURA

Location

AUDI

Fuse/Relay

CHRYSLER Group LLC

Fuse/Relay

AUDI

Fuse/Relay

BMW

Fuse/Relay

CHRYSLER Group LLC

Related Procedures

Procedure

02V120000: Ignition Switch (02V120000)

Procedure

A/C Refrigerant (Compressor) Oil Guide (BJA34004)

Procedure

A/C Refrigerant And Oil Type Guide (BJA1330)

Procedure

Certain Vehicle Parts Are Marked With VIN (R Dot) (ASN0204-01)

Procedure

Cutting Keys With The EXACTA Key Code Cutter (99-010)

Procedure

ACURA Recommended Materials (B99-015)