Crown 0W-16 oil service kit (4.20 QTS)
Buy the exact 0W-16 oil and filter the Toyota Crown requires.
Using the wrong viscosity risks engine wear and warranty issues. The factory spec is 0W-16.
Check Price and Fitment🛢️Oil Type & Capacity
Toyota Crown Oil Type & Capacity
Factory manual oil type & capacity for the Toyota Crown. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-05-12 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2023-2024 Toyota Crown uses 4.20 QTS. (3.97 L) — TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8 Note: If SAE 0W-8 is not available, SAE 0W-16 oil may be used. However, it must be replaced with SAE 0W-8 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick..
| Generation | Years | Top spec |
|---|---|---|
| 2023-2024 | 2023-2024 | 4.20 QTS. (3.97 L) — TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8 Note: If SAE 0W-8 is not available, SAE 0W-16 oil may be used. However, it must be replaced with SAE 0W-8 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick. |
Factory Manual Verification
Cross-check these specs against the official Toyota Crown maintenance schedule.
Factory Manual ConfirmationOil Type & Capacity
Know the exact oil type & capacity job for your Toyota Crown
2023-2024 Toyota Crown uses 4.20 QTS. (3.97 L) — TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8 Note: If SAE 0W-8 is not available, SAE 0W-16 oil may be used. However, it must be replaced with SAE 0W-8 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick..
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
Use the archive navigator when you need the exact engine, trim, or production-branch manual instead of a broad year-range summary. That keeps the buying list and repair steps aligned with the real vehicle.
Open the manual links above to confirm the exact engine and trim branch before ordering parts.
2023-2024
2023-2024Engine Oil (2.5L Eng)4.20 QTS. (3.97 L) — TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8 Note: If SAE 0W-8 is not available, SAE 0W-16 oil may be used. However, it must be replaced with SAE 0W-8 at the next oil change.
The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick.
Engine Oil (2.4L Eng)5.30 QTS. (5.01 L) — TOYOTA Genuine Motor Oil. ILSAC GF-6A SAE 0W-20 Multigrade Engine Oil Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change.
The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick.
Notes
- →If SAE 0W-8 is not available, SAE 0W-16 oil may be used. However, it must be replaced with SAE 0W-8 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick.
- →SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick.
Ready to BuyFitment-first picks for Toyota Crown
Buy the Exact Parts and Tools for This Job
These links are built from the same specs shown on this page so users can move from lookup to purchase faster. Confirm exact engine and trim if your vehicle has multiple variants, then build the full cart before you step away from the computer.
Affiliate disclosure: We may earn a commission at no extra cost to you. The goal is to get you to the right parts in one pass.
Spec Snapshot
- Engine Oil (2.5L Eng)
- 4.20 QTS. (3.97 L) — TOYOTA Genuine Motor Oil. JASO GLV-1 SAE 0W-8 Note: If SAE 0W-8 is not available, SAE 0W-16 oil may be used. However, it must be replaced with SAE 0W-8 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick.
- Engine Oil (2.4L Eng)
- 5.30 QTS. (5.01 L) — TOYOTA Genuine Motor Oil. ILSAC GF-6A SAE 0W-20 Multigrade Engine Oil Note: SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. When actually adding the engine oil, make sure that the oil level is between the low level mark and refill upper limit mark Warm up the engine and turn off the hybrid system, wait about 5 minutes, and check the oil level on the dipstick.
Exact-fit oil filter
Filter options specific to this model family.
Correct filter fitment protects oil pressure and bypass behavior.
Check Price and FitmentDrain plug gasket and service extras
Small parts that prevent leaks after service.
Fresh crush washers reduce post-change seepage risk.
Check Price and FitmentOil drain pan and funnel
Keep the oil change clean from drain to refill.
Simple cleanup tools reduce mess and save time in the garage.
Check Price and FitmentShop towels for cleanup
Lint-free wipes for dipsticks, spills, and filter surfaces.
The smallest supplies are often the most-used during DIY service.
Check Price and FitmentBefore you buy, sanity-check the repair quote and the cart
If your shop quote looks high, run it through Quote Shield to catch overpricing before checkout. Then use the parts links above to lock in the one-trip plan.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
🛢️Shop →
Premium Full Synthetic Oil
Match the viscosity (e.g. 0W-20) to your vehicle spec.
🔍Shop →
Oil Filter
High-efficiency filter to match your specific engine model.
📥Shop →
Oil Drain Pan
Low-profile pan for easy oil collection and disposal.
🔧Shop →
Filter Wrench
Adjustable or size-specific wrench to remove stuck filters.
🌪️Shop →
Funnel Set
Prevent spills when refilling your engine oil.
🧻Shop →
Shop Towels
Lint-free towels for spills, dipsticks, and filter surfaces.
🧰View All →
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Toyota Crown so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
Get the Complete Maintenance Schedule for Toyota Crown
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Written by AllOEMManuals Editorial Team. Reviewed by ASE-certified technicians and updated with factory-reference checks for fitment-sensitive steps.
This guide was drafted with AI assistance and reviewed for accuracy by a human editor.
Last updated: 2026-05-12