Toyota Corolla iM Standard Trans Fluid Capacities
Factory fluid capacity for the Toyota Corolla iM Standard Trans.
Last updated: 2026-10-29 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2017-2018 Toyota Corolla iM Standard Trans: 0.97 LBS. (0.43 KG) — HFC-134a (R-134a).
| Generation | Years | Top spec |
|---|---|---|
| 2017-2018 | 2017-2018 | 0.97 LBS. (0.43 KG) — HFC-134a (R-134a) |
This vehicle's factory manual
The spec is above. This opens the 2017 Toyota Corolla iM Standard Trans factory book. Use another year if yours is older.
Toyota Corolla iM Standard Trans maintenance schedule
Know the exact fluid capacities job for your Toyota Corolla iM Standard Trans
2017-2018 Toyota Corolla iM Standard Trans: 0.97 LBS. (0.43 KG) — HFC-134a (R-134a).
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2017-2018
- →DO NOT use plain water alone. The fluid capacity is the quantity of reference.
- →SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
- →Toyota recommends to use TOYOTA Genuine Manual Transmission Gear Oil LV to achieve optimal performance. Please be aware that depending on the particular characteristics of the gear oil used or the operating conditions, idle sound, shift feeling and/or fuel efficiency may be different or affected.
- →Your Toyota vehicle is filled with Toyota Genuine Differential Gear Oil at the factory. Use Toyota approved Toyota Genuine Differential Gear Oil or an equivalent of matching quality to satisfy the specification.
Manual already checked Amazon for you
You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.
Toyota Corolla iM Standard Trans Fluid Service Kit
Buy all the fluids your Toyota Corolla iM Standard Trans needs in one cart.
We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.
Fluids — Manual's Parts List
Everything for a full fluid service weekend.
- 1Engine OilShop →
Match viscosity to your spec
- 2CoolantShop →
Match color/chemistry — never mix types
- 3Long-Neck FunnelShop →
Transmission and differential fill holes are recessed
- 4Fluid Extraction PumpShop →
Remove old brake fluid from reservoir without mess
- 5Shop RagsShop →
You will need more than you think
Get everything at once
One search shows all of the above on a single page.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Toyota Corolla iM Standard Trans so the job is ready when the parts arrive.
Frequently Asked Questions
- What fluid capacities does a Toyota Corolla iM Standard Trans use?
- 2017-2018 Toyota Corolla iM Standard Trans: 0.97 LBS. (0.43 KG) — HFC-134a (R-134a).
- Why do fluid capacities vary by generation for the Toyota Corolla iM Standard Trans?
- Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.
Get the Complete Maintenance Schedule for Toyota Corolla iM Standard Trans
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-10-29