Mercedes Benz E350 Serpentine Belt
Factory serpentine belt specifications for the Mercedes Benz E350.
Last updated: 2026-10-29 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2020-2023 Mercedes Benz E350: REMOVE/INSTALL POLY-V BELT REMOVE/INSTALL REFRIGERANT COMPRESSOR POLY-V-BELT REMOVE/INSTALL POLY V-BELT OF ALTERNATOR.
| Generation | Years | Top spec |
|---|---|---|
| 2020-2023 | 2020-2023 | REMOVE/INSTALL POLY-V BELT REMOVE/INSTALL REFRIGERANT COMPRESSOR POLY-V-BELT REMOVE/INSTALL POLY V-BELT OF ALTERNATOR |
| 2015-2016 | 2015-2016 | REMOVE/INSTALL BELT DRIVE COMPONENTS |
This vehicle's factory manual
The spec is above. This opens the 2020 Mercedes Benz E350 factory book. Use another year if yours is older.
Mercedes Benz E350 maintenance schedule
Know the exact serpentine belt job for your Mercedes Benz E350
2020-2023 Mercedes Benz E350: REMOVE/INSTALL POLY-V BELT REMOVE/INSTALL REFRIGERANT COMPRESSOR POLY-V-BELT REMOVE/INSTALL POLY V-BELT OF ALTERNATOR.
Belt routing and length change with engine code, accessory package, and tensioner layout. Do not order parts off a generic diagram. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2020-2023
2015-2016
Manual already checked Amazon for you
You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.
Mercedes Benz E350 Serpentine Belt
Match the exact belt length and rib count for your Mercedes Benz E350 engine.
We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.
Serpentine Belt — Manual's Parts List
Belt, tensioner, and the tool to do it right.
- 1Serpentine BeltShop →
Exact length and rib count for your engine
- 2Belt TensionerShop →
A weak tensioner ruins a new belt in 2,000 miles
- 3Idler PulleyShop →
If it wobbles or squeaks, replace it while you are in there
- 4Breaker Bar (1/2")Shop →
Tensioners need leverage — a ratchet will not cut it
- 5Belt Routing DiagramShop →
Take a photo before you remove the old belt
Get everything at once
One search shows all of the above on a single page.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Exact Serpentine Belt
Match engine-specific length and rib count for the cleanest fit.
Belt Tensioner
Replace weak spring-loaded tensioners that cause squeal and slip.
Idler Pulley
Quiet bearing support when the belt is off anyway.
Pulley Puller Set
Useful for stubborn idler and tensioner pulley swaps.
Breaker Bar
Makes tensioner release easier in tight engine bays.
Shop Towels
Keep the accessory drive and your hands clean during inspection.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Mercedes Benz E350 so the job is ready when the parts arrive.
Frequently Asked Questions
- What serpentine belt does a Mercedes Benz E350 use?
- 2020-2023 Mercedes Benz E350: REMOVE/INSTALL POLY-V BELT REMOVE/INSTALL REFRIGERANT COMPRESSOR POLY-V-BELT REMOVE/INSTALL POLY V-BELT OF ALTERNATOR.
- How do I know if my Mercedes Benz E350 serpentine belt is bad?
- Common signs include squealing on startup (especially when cold), visible cracks or fraying on the ribbed side, power steering or A/C failure, and battery warning lights. The factory manual includes inspection criteria and replacement intervals.
Get the Complete Maintenance Schedule for Mercedes Benz E350
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-10-29