❄️Coolant Type

Land Rover Defender Coolant Type

Land Rover Defender coolant type by generation with JLR specification, capacity, and mix ratio.

Last updated: 2026-10-28 • Reading time: 8 min • By AllOEMManuals Editorial Team

Quick Answer

The modern Land Rover Defender (2020+) uses JLR STJLR.651.5003 coolant (pink OAT). Capacity is ~12-14L depending on engine. Mix 50/50 with distilled water.

GenerationYearsTop spec
L663 (2020-2025)2020-2025JLR STJLR.651.5003
Classic (1983-2016)1983-2016Ethylene glycol based (varies by year)

This vehicle's factory manual

The spec is above. This opens the 2020 Land Rover Defender factory book. Use another year if yours is older.

Open the 2020 Land Rover manual

Land Rover Defender maintenance schedule

Factory Manual ConfirmationCoolant Type

Know the exact coolant type job for your Land Rover Defender

The modern Land Rover Defender (2020+) uses JLR STJLR.651.5003 coolant (pink OAT). Capacity is ~12-14L depending on engine. Mix 50/50 with distilled water.

Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.

Exact Vehicle Check

The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.

Open the factory manual above to confirm the exact engine before ordering parts.

L663 (2020-2025)

Coolant SpecJLR STJLR.651.5003
ColorPink (OAT)
2.0L P300 Capacity~12L dry fill
3.0L P400 Capacity~13L dry fill
5.0L V8 Capacity~14L dry fill
Mix Ratio50/50 distilled water
Change IntervalProduct expiry (3-5 years)
Notes
  • →Also known as G12+ spec
  • →Do NOT mix with green or universal coolant

Classic (1983-2016)

Coolant SpecEthylene glycol based (varies by year)
ColorGreen or blue (market dependent)
Typical Capacity~10-12L
Mix Ratio50/50
Change Interval2 years / 40,000 km

Manual already checked Amazon for you

You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.

The Exact Part
Verified Fit

Land Rover Defender coolant

Get the exact coolant chemistry your Land Rover Defender needs. Wrong coolant = sludge and overheating.

We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.

Coolant Service — Manual's Parts List

Flush or top-off — here is exactly what you need.

Vehicle-Scoped Amazon Search

Opens Amazon with Land Rover Defender prefilled so you can confirm fitment and avoid wrong parts.

Check Fitment on Amazon

Get everything at once

One search shows all of the above on a single page.

See All on Amazon

Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.

One-Trip Shopping List

Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.

Frequently Asked Questions

What coolant does a Land Rover Defender use?
2020+ Defender uses JLR STJLR.651.5003 pink OAT coolant. Classic Defenders typically used green ethylene glycol coolant. Never mix different types.
What coolant type does a Land Rover Defender use?
The modern Land Rover Defender (2020+) uses JLR STJLR.651.5003 coolant (pink OAT). Capacity is ~12-14L depending on engine. Mix 50/50 with distilled water.
Can I use universal coolant in a Land Rover Defender?
Factory manuals specify exact coolant chemistry for the Land Rover Defender. Using the wrong coolant type can cause corrosion, overheating, or gasket damage. Always match the OEM specification exactly — do not mix incompatible coolant types.

Get the Complete Maintenance Schedule for Land Rover Defender

Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.

Not sure you want to DIY? Compare local shop pricing first.

Author & Review

Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.

Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.

Last updated: 2026-10-28

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required