Honda S2000 Headlight Bulb Size
Find the correct headlight bulb size for your Honda S2000. Covers low beam, high beam, fog lights, and turn signals for all years.
Last updated: 2026-05-07 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
The Honda S2000 headlight bulb size depends on the model year and trim. Common sizes include H11 (low beam), 9005/HB3 (high beam), and H16 (fog lights) — see the full breakdown below.
| Generation | Years | Top spec |
|---|---|---|
| 2004-2009 | 2004-2009 | 9006/HB4 or H4 |
| 2000-2003 | 2000-2003 | 9006/HB4 or H4 |
Know the exact headlight bulb size job for your Honda S2000
The Honda S2000 headlight bulb size depends on the model year and trim. Common sizes include H11 (low beam), 9005/HB3 (high beam), and H16 (fog lights) — see the full breakdown below.
Bulb size can change between reflector, projector, HID, LED, and market-specific housings. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
Use the archive navigator when you need the exact engine, trim, or production-branch manual instead of a broad year-range summary. That keeps the buying list and repair steps aligned with the real vehicle.
2004-2009
Representative 2004 manual branch for 2004-2009
Testing and Inspection
S2000 L4-2.2L
Repair and Diagnosis: Testing and Inspection — 2004 Honda S2000 L4-2.2L Service Manual ~ LEMON Manuals LEMON Manuals: Repair Knowledge Reimagined Home >> Honda >> 2004 >> S2000 L4-2.2L...
Open factory section →Testing and Inspection
Accord L4-2.4L
Repair and Diagnosis: Testing and Inspection — 2004 Honda Accord L4-2.4L Service Manual ~ LEMON Manuals LEMON Manuals: Repair Knowledge Reimagined Home >> Honda >> 2004 >> Accord L4-2....
Open factory section →2004-2009
2004-2009- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
2000-2003
2000-2003- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
LED Upgrade Bulbs
Brighter, whiter light for better nighttime visibility.
Replacement Halogens
Standard OEM-spec bulbs for reliable replacement.
Dielectric Grease
Protects electrical connectors from moisture.
Latex-Free Gloves
Avoid fingerprints on the bulb and keep glass clean.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Honda S2000 so the job is ready when the parts arrive.
Frequently Asked Questions
- What size headlight bulb does a Honda S2000 use?
- The Honda S2000 headlight bulb size varies by year. Newer models often use factory LED units, while older models use H11, H7, or 9006 halogen bulbs. Check the year-specific specs below for your exact fitment.
- Can I put LED bulbs in my Honda S2000?
- If your Honda S2000 has halogen headlights, you can install LED replacement bulbs. Look for bulbs with a proper beam pattern (projector-compatible) to avoid blinding other drivers. Some models may need anti-flicker adapters.
- How do I replace the headlight bulb on a Honda S2000?
- On most Honda S2000 models, you can access the headlight bulb from behind the headlight assembly in the engine bay. Twist the bulb socket counterclockwise, pull out the old bulb, insert the new one (don't touch the glass), and twist back in.
- Why does my Honda S2000 headlight keep burning out?
- Frequent bulb burnout on the Honda S2000 is usually caused by a loose connection, moisture in the housing, touching the bulb glass during installation, or a voltage regulator issue. Check the connector and housing seal.
Get the Complete Maintenance Schedule for Honda S2000
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Written by AllOEMManuals Editorial Team. Reviewed by ASE-certified technicians and updated with factory-reference checks for fitment-sensitive steps.
This guide was drafted with AI assistance and reviewed for accuracy by a human editor.
Last updated: 2026-05-07