Ford Police Interceptor Utility 3.5L Eng VIN T Oil Type & Capacity
Factory oil type for the Ford Police Interceptor Utility 3.5L Eng VIN T.
Last updated: 2026-11-11 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2019 Ford Police Interceptor Utility 3.5L Eng VIN T: 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil.
| Generation | Years | Top spec |
|---|---|---|
| 2019 | 2019 | 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil |
| 2017-2018 | 2017-2018 | 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil |
| 2015-2016 | 2015-2016 | 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil |
This vehicle's factory manual
Ford Police Interceptor Utility 3.5L Eng VIN T: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Ford Police Interceptor Utility 3.5L Eng VIN T maintenance schedule
Check oil type & capacity information for your Ford Police Interceptor Utility 3.5L Eng VIN T
2019 Ford Police Interceptor Utility 3.5L Eng VIN T: 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil.
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Find Your Vehicle
Choose your year, model and configuration before using a specification or ordering parts. The example source may describe a different vehicle or trim.
2019
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.
2017-2018
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.
2015-2016
- →Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
Parts and supplies
These links search for related products. Check your year, engine, specification, and fitment with the seller before ordering.
Ford Police Interceptor Utility 3.5L Eng VIN T 5W-20 Oil + Filter
Confirm the specification and fitment for your exact vehicle before ordering.
We earn a small commission if you buy through these links — at zero extra cost to you. These are search results, not verified vehicle-specific recommendations.
Oil Change — Manual's Parts List
Everything for one clean oil change. No extra trips.
- 1Engine OilShop →
5W-20 — get the right number of quarts
- 2Oil FilterShop →
Match to your engine variant
- 3Drain Plug Crush WasherShop →
The #1 cause of post-change leaks
- 4Oil Filter WrenchShop →
Hand-tightened filters seize after heat cycles
- 5Shop Rags / Blue TowelsShop →
6-pack — you will use more than you think
Get everything at once
Search results vary; confirm each item and its fitment before buying.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Premium Full Synthetic Oil
Match the viscosity (e.g. 0W-20) to your vehicle spec.
Oil Filter
High-efficiency filter to match your specific engine model.
Oil Drain Pan
Low-profile pan for easy oil collection and disposal.
Filter Wrench
Adjustable or size-specific wrench to remove stuck filters.
Funnel Set
Prevent spills when refilling your engine oil.
Shop Towels
Lint-free towels for spills, dipsticks, and filter surfaces.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Ford Police Interceptor Utility 3.5L Eng VIN T so the job is ready when the parts arrive.
Frequently Asked Questions
- What oil type & capacity does a Ford Police Interceptor Utility 3.5L Eng VIN T use?
- 2019 Ford Police Interceptor Utility 3.5L Eng VIN T: 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil.
- How much oil does a Ford Police Interceptor Utility 3.5L Eng VIN T take?
- 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil (2019)
- How often should I change the oil in a Ford Police Interceptor Utility 3.5L Eng VIN T?
- Most Ford service manuals recommend oil changes every 5,000–7,500 miles under normal driving conditions. Severe conditions (towing, extreme temperatures, stop-and-go traffic) may require more frequent changes. Verify with your owner's manual for the exact interval.
Find your service manual
Select your vehicle and check the available manual sections for your exact configuration.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-11-11