Correct coolant for this platform
Match chemistry and color family before topping off or flushing.
Mixing coolant types can cause gel formation and overheating.
Check Price and Fitment🧪Fluid Capacities
Ford Police Interceptor Sedan 3.7L Eng VIN K Fluid Capacities
Factory manual fluid capacities for the Ford Police Interceptor Sedan 3.7L Eng VIN K. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-05-12 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2017 Ford Police Interceptor Sedan 3.7L Eng VIN K: 7.90 OZS. (0.23 L) — PAG 46
| Generation | Years | Top spec |
|---|---|---|
| 2017 | 2017 | 7.90 OZS. (0.23 L) — PAG 46 |
| 2016 | 2016 | 7.90 OZS. (0.23 L) — PAG 46 |
| 2015 | 2015 | 7.90 OZS. (0.23 L) — PAG 46 |
Factory Manual Verification
Cross-check these specs against the official Ford Police Interceptor Sedan 3.7L Eng VIN K maintenance schedule.
Factory Manual ConfirmationFluid Capacities
Know the exact fluid capacities job for your Ford Police Interceptor Sedan 3.7L Eng VIN K
2017 Ford Police Interceptor Sedan 3.7L Eng VIN K: 7.90 OZS. (0.23 L) — PAG 46
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
Use the archive navigator when you need the exact engine, trim, or production-branch manual instead of a broad year-range summary. That keeps the buying list and repair steps aligned with the real vehicle.
Open the manual links above to confirm the exact engine and trim branch before ordering parts.
2017
2017Air Cond Compressor Oil (3.7L Eng)7.90 OZS. (0.23 L) — PAG 46
Air Cond Refrigerant (3.7L Eng)1.62 LBS. (0.73 KG) — R-134a
Automatic Transmission Fluid (3.7L Eng)10.90 QTS. (10.31 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range.
Use of any fluid other than the recommended fluid may cause transmission damage.
Brake Fluid— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.
Fill between "max" and "min" lines on reservoir.
Differential Gear Oil2.40 PTS. (1.13 L) — MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant Note: Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
Engine Coolant (3.7L Eng)11.50 QTS. (10.88 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (3.7L Eng)6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil Note: To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.
Fuel Tank19.00 GALS. (71.92 L)
Transfer Case Fluid18.00 OZS. (0.53 L) — MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant
Windshield Washer Fluid— MOTORCRAFT Premium Windshield Washer Concentrate Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio.
Notes
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2016
2016Air Cond Compressor Oil (3.7L Eng)7.90 OZS. (0.23 L) — PAG 46
Air Cond Refrigerant (3.7L Eng)1.62 LBS. (0.73 KG) — R-134a
Automatic Transmission Fluid (3.7L Eng)10.90 QTS. (10.31 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range.
Use of any fluid other than the recommended fluid may cause transmission damage.
Brake Fluid— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.
Fill between "max" and "min" lines on reservoir.
Differential Gear Oil2.40 PTS. (1.13 L) — MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant Note: Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
Engine Coolant (3.7L Eng)11.50 QTS. (10.88 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (3.7L Eng)6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.
DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
Fuel Tank19.00 GALS. (71.92 L)
Transfer Case Fluid18.00 OZS. (0.53 L) — MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant
Windshield Washer Fluid— MOTORCRAFT Premium Windshield Washer Concentrate Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio.
Notes
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle.
- →Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2015
2015Air Cond Compressor Oil (3.7L Eng)7.90 OZS. (0.23 L) — PAG 46
Air Cond Refrigerant (3.7L Eng)1.62 LBS. (0.73 KG) — R-134a
Automatic Transmission Fluid (3.7L Eng)10.90 QTS. (10.31 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV
Brake Fluid— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2.
Fill between "max" and "min" lines on reservoir.
Differential Gear Oil2.40 PTS. (1.13 L) — MOTORCRAFT SAE 80W-90 Premium Rear Axle Lubricant Note: Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
Engine Coolant (3.7L Eng)11.50 QTS. (10.88 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (3.7L Eng)6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.
DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
Fuel Tank19.00 GALS. (71.92 L)
Transfer Case Fluid18.00 OZS. (0.53 L) — MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant
Windshield Washer Fluid— MOTORCRAFT Premium Windshield Washer Concentrate Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio.
Notes
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle.
- →Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
- →Follow the Manufacturer's Instructions for the mixture ratio.
Ready to BuyFitment-first picks for Ford Police Interceptor Sedan 3.7L Eng VIN K
Buy the Exact Parts and Tools for This Job
These links are built from the same specs shown on this page so users can move from lookup to purchase faster. Confirm exact engine and trim if your vehicle has multiple variants, then build the full cart before you step away from the computer.
Affiliate disclosure: We may earn a commission at no extra cost to you. The goal is to get you to the right parts in one pass.
Spec Snapshot
- Engine Oil (3.7L Eng)
- 6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. Optional: MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil Note: To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.
- Engine Coolant (3.7L Eng)
- 11.50 QTS. (10.88 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted Note: Add the coolant type originally equipped in the vehicle.
- Automatic Transmission Fluid (3.7L Eng)
- 10.90 QTS. (10.31 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
Transmission fluid for your gearbox
Fluid choice must match the transmission specification.
Incorrect ATF is a common cause of poor shift quality.
Check Price and FitmentBrake fluid and bleed kit
DOT-rated fluid plus simple bleeding tools.
Moisture-heavy brake fluid lowers boiling performance over time.
Check Price and FitmentLong-neck funnel and extractor
Useful for topping off and moving fluids cleanly.
These save time when the fill point is awkward or hidden.
Check Price and FitmentShop towels and gloves
Basic cleanup gear for any fluid service job.
Cleanup tools make every service easier and safer.
Check Price and FitmentBefore you buy, sanity-check the repair quote and the cart
If your shop quote looks high, run it through Quote Shield to catch overpricing before checkout. Then use the parts links above to lock in the one-trip plan.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
💉Shop →
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
🧹Shop →
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
🌪️Shop →
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
🧤Shop →
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
🧰View All →
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Ford Police Interceptor Sedan 3.7L Eng VIN K so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
Get the Complete Maintenance Schedule for Ford Police Interceptor Sedan 3.7L Eng VIN K
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Written by AllOEMManuals Editorial Team. Reviewed by ASE-certified technicians and updated with factory-reference checks for fitment-sensitive steps.
This guide was drafted with AI assistance and reviewed for accuracy by a human editor.
Last updated: 2026-05-12