Ford Fusion Oil Type & Capacity
Factory manual oil type & capacity for the Ford Fusion. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-10-28 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2020 Ford Fusion uses 4.10 QTS. (3.88 L) — MOTORCRAFT SAE 0W-20 Premium Synthetic Blend Motor Oil Note: If SAE 0W-20 oil is not available, SAE 5W-20 oil is acceptable..
| Generation | Years | Top spec |
|---|---|---|
| 2020 | 2020 | 4.10 QTS. (3.88 L) — MOTORCRAFT SAE 0W-20 Premium Synthetic Blend Motor Oil Note: If SAE 0W-20 oil is not available, SAE 5W-20 oil is acceptable. |
| 2019 | 2019 | 4.50 QTS. (4.25 L) — MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil Note: Optional motor oil: MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. |
| 2017-2018 | 2017-2018 | 4.50 QTS. (4.25 L) — MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil Note: Optional motor oil: MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil. |
This vehicle's factory manual
The spec is above. This opens the 2020 Ford Fusion factory book. Use another year if yours is older.
Ford Fusion maintenance schedule
Know the exact oil type & capacity job for your Ford Fusion
2020 Ford Fusion uses 4.10 QTS. (3.88 L) — MOTORCRAFT SAE 0W-20 Premium Synthetic Blend Motor Oil Note: If SAE 0W-20 oil is not available, SAE 5W-20 oil is acceptable..
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2020
- →If SAE 0W-20 oil is not available, SAE 5W-20 oil is acceptable.
- →Optional motor oil: MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil.
- →SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
2019
- →Optional motor oil: MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil.
- →Optional motor oil: MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil.
- →Optional motor oil: MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil.
2017-2018
- →Optional motor oil: MOTORCRAFT SAE 5W-20 Premium Synthetic Blend Motor Oil.
- →Optional motor oil: MOTORCRAFT SAE 5W-20 Full Synthetic Motor Oil.
- →Optional motor oil: MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil.
2016
- →API - SAE 5W-20 Full Synthetic Motor Oil may be used if SAE 0W-20 Synthetic Blend Motor Oil is not available.
- →Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.
2015
- →The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. You can use SAE 5W-20 oil if SAE 0W-20 oil is not available.
- →Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty.
Manual already checked Amazon for you
You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.
Ford Fusion 0W-20 Oil + Filter
The factory spec is 0W-20. Buy the exact oil and matching filter in one shot.
We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.
Oil Change — Manual's Parts List
Everything for one clean oil change. No extra trips.
- 1Engine OilShop →
0W-20 — get the right number of quarts
- 2Oil FilterShop →
Match to your engine variant
- 3Drain Plug Crush WasherShop →
The #1 cause of post-change leaks
- 4Oil Filter WrenchShop →
Hand-tightened filters seize after heat cycles
- 5Shop Rags / Blue TowelsShop →
6-pack — you will use more than you think
Get everything at once
One search shows all of the above on a single page.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Premium Full Synthetic Oil
Match the viscosity (e.g. 0W-20) to your vehicle spec.
Oil Filter
High-efficiency filter to match your specific engine model.
Oil Drain Pan
Low-profile pan for easy oil collection and disposal.
Filter Wrench
Adjustable or size-specific wrench to remove stuck filters.
Funnel Set
Prevent spills when refilling your engine oil.
Shop Towels
Lint-free towels for spills, dipsticks, and filter surfaces.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Ford Fusion so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
- What oil type & capacity does a Ford Fusion use?
- 2020 Ford Fusion uses 4.10 QTS. (3.88 L) — MOTORCRAFT SAE 0W-20 Premium Synthetic Blend Motor Oil Note: If SAE 0W-20 oil is not available, SAE 5W-20 oil is acceptable..
- How much oil does a Ford Fusion take?
- 4.10 QTS. (3.88 L) — MOTORCRAFT SAE 0W-20 Premium Synthetic Blend Motor Oil Note: If SAE 0W-20 oil is not available, SAE 5W-20 oil is acceptable. (2020)
- How often should I change the oil in a Ford Fusion?
- Most Ford service manuals recommend oil changes every 5,000–7,500 miles under normal driving conditions. Severe conditions (towing, extreme temperatures, stop-and-go traffic) may require more frequent changes. Verify with your owner's manual for the exact interval.
Get the Complete Maintenance Schedule for Ford Fusion
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-10-28