Ford F-550 Super Duty Fluid Capacities
Factory manual fluid capacities for the Ford F-550 Super Duty. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-11-10 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2024 Ford F-550 Super Duty: 3.70 OZS. (0.1 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: This system uses mineral-based refrigerant oil to lubricate O-rings and fittings.
| Generation | Years | Top spec |
|---|---|---|
| 2024 | 2024 | 3.70 OZS. (0.1 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: This system uses mineral-based refrigerant oil to lubricate O-rings and fittings. |
| 2023 | 2023 | 3.70 OZS. (0.1 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: This system uses mineral-based refrigerant oil to lubricate O-rings and fittings. |
| 2020-2022 | 2020-2022 | 3.70 OZS. (0.1 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: This system uses mineral-based refrigerant oil to lubricate O-rings and fittings. |
This vehicle's factory manual
Ford F-550 Super Duty: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Ford F-550 Super Duty maintenance schedule
Check fluid capacities information for your Ford F-550 Super Duty
2024 Ford F-550 Super Duty: 3.70 OZS. (0.1 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: This system uses mineral-based refrigerant oil to lubricate O-rings and fittings.
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Find Your Vehicle
Choose your year, model and configuration before using a specification or ordering parts. The example source may describe a different vehicle or trim.
2024
- →This system uses mineral-based refrigerant oil to lubricate O-rings and fittings.
- →Approximate dry fill capacity. Actual amount may vary during fluid changes.
- →Specification: WSS-M99C130-A.
- →For complete refill of limited slip axles, add 4.4 fl oz. (130 ml) of Additive Friction Modifier XL-3 or equivalent, meeting specification EST-M2C118-A. Include this friction modifier in the total lube volume of 2.2 qt (2.08 L).
- →Capacity is: 3.3 - 3.5 qt.
- →Capacity is: 3.5 - 3.6 qt.
- →Capacity is: 3.65 - 3.80 qt.
- →For complete refill of limited slip axles, add 8.07 fl oz. (238.8 ml) of Additive Friction Modifier XL-3 or equivalent, meeting Ford Specification EST-M2C118-A.
- →For complete refill of limited slip axles, add 9.49 fl oz. (280.8 ml) of Additive Friction Modifier XL-3 or equivalent, meeting Ford Specification EST-M2C118-A.
- →Add the coolant type originally equipped in the vehicle.
- →Alternative Engine Oil for extremely cold climates: SAE 0W-40. Alternative Engine Oil for severe duty service: SAE 5W-40 Full Synthetic Diesel Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
2023
- →This system uses mineral-based refrigerant oil to lubricate O-rings and fittings.
- →Approximate dry fill capacity. Actual amount may vary during fluid changes.
- →Specification: WSS-M99C130-A.
- →Capacity is: 3.3 - 3.5 qt.
- →Capacity is: 3.5 - 3.6 qt.
- →Capacity is: 3.65 - 3.80 qt.
- →For complete refill of limited slip axles, add 8.07 fl oz. (238.8 ml) of Additive Friction Modifier XL-3 or equivalent, meeting Ford Specification EST-M2C118-A.
- →For complete refill of limited slip axles, add 9.49 fl oz. (280.8 ml) of Additive Friction Modifier XL-3 or equivalent, meeting Ford Specification EST-M2C118-A.
- →Add the coolant type originally equipped in the vehicle.
- →Alternative Engine Oil for extremely cold climates: SAE 0W-40. Alternative Engine Oil for severe duty service: SAE 5W-40 Full Synthetic Diesel Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →For complete refill of limited slip axles, add 4.4 fl oz. (130 ml) of Additive Friction Modifier XL-3 or equivalent, meeting specification EST-M2C118-A. Include this friction modifier in the total lube volume of 2.2 qt (2.08 L).
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
2020-2022
- →This system uses mineral-based refrigerant oil to lubricate O-rings and fittings.
- →Approximate capacity.
- →Specification: WSS-M99C130-A.
- →For complete refill of limited slip axles, add 5.4 fl oz. (160 ml) of Additive Friction Modifier XL-3 or equivalent, meeting specification EST-M2C118-A. Include this friction modifier in the total lube volume of 2.75 qt (2.6 L).
- →Capacity is: 3.3 - 3.5 qt.
- →Capacity is: 3.5 - 3.6 qt.
- →For complete refill of limited slip axles, add 7.1 fl oz. (210 ml) of Additive Friction Modifier XL-3 or equivalent, meeting specification EST-M2C118-A. Include this friction modifier in the total lube volume of 3.78 qt (3.58 L).
- →Add the coolant type originally equipped in the vehicle.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
2018-2019
- →Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B.
- →Specification: WSS-M99C130-A.
- →MOTORCRAFT Additive Friction Modifier XL-3 (EST-M2C118-A).
- →Capacity is: 3.3 - 3.5 qt.
- →Add the coolant type originally equipped in the vehicle.
- →Keep fluid level between MIN and MAX on reservoir.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury.
2017
- →Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B.
- →Ford recommends using Motorcraft (Ford) DOT 3 LV High Performance Motor Vehicle Brake Fluid, Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A1 or WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Specification: WSS-M99C130-A.
- →For complete refill of limited slip Ford axles add 8.8 fl oz. (260ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118-A.
- →Capacity is: 3.3 - 3.5 qt.
- →Capacity is: 3.5 - 3.6 qt.
- →48.0 fl. oz. (1.4l) per addition if required.
- →Add the coolant type originally equipped in the vehicle.
- →16 fl. oz. (473 ml) per addition if required.
- →Keep fluid level between MIN and MAX on reservoir.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury.
- →Ford has designed your engine to use Motorcraft engine oils or equivalent oils that meet Ford’s specification. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
2016
- →Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B.
- →Ford recommends using Motorcraft (Ford) DOT 3 LV High Performance Motor Vehicle Brake Fluid, Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A1 or WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →48.0 fl. oz. (1.4l) per addition if required.
- →Add the coolant type originally equipped in the vehicle.
- →16 fl. oz. (473 ml) per addition if required.
- →Keep fluid level between MIN and MAX on reservoir.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury.
- →Ford has designed your engine to use Motorcraft engine oils or equivalent oils that meet Ford’s specification. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
2015
- →Use the correct automatic transmission fluid. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Fill to the proper capacity according to dipstick Type A or Type B.
- →Ford recommends using Motorcraft (Ford) DOT 3 LV High Performance Motor Vehicle Brake Fluid, Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A1 or WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →48.0 fl. oz. (1.4l) per addition if required.
- →Add the coolant type originally equipped in the vehicle.
- →16 fl. oz. (473 ml) per addition if required.
- →Keep fluid level between MIN and MAX on reservoir.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury.
- →Ford has designed your engine to use Motorcraft engine oils or equivalent oils that meet Ford’s specification. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
Search for fluids
Choose the fluid you need. Check your vehicle, service procedure and manufacturer specification before buying; search results are not verified matches.
As an Amazon Associate, AllOEMManuals earns from qualifying purchases.
Fluids — Manual's Parts List
Everything for a full fluid service weekend.
- 1Engine OilShop →
Match viscosity to your spec
- 2CoolantShop →
Match color/chemistry — never mix types
- 3Long-Neck FunnelShop →
Transmission and differential fill holes are recessed
- 4Fluid Extraction PumpShop →
Remove old brake fluid from reservoir without mess
- 5Shop RagsShop →
You will need more than you think
Get everything at once
Search results vary; confirm each item and its fitment before buying.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Ford F-550 Super Duty so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
- What fluid capacities does a Ford F-550 Super Duty use?
- 2024 Ford F-550 Super Duty: 3.70 OZS. (0.1 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: This system uses mineral-based refrigerant oil to lubricate O-rings and fittings.
- Why do fluid capacities vary by generation for the Ford F-550 Super Duty?
- Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.
Find your service manual
Select your vehicle and check the available manual sections for your exact configuration.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-11-10
