🧪Fluid Capacities

Ford E-350 Super Duty Cutaway Fluid Capacities

Factory manual fluid capacities for the Ford E-350 Super Duty Cutaway. Exact capacities and specs extracted from the LEMON service manual archive.

Last updated: 2026-11-09 • Reading time: 8 min • By AllOEMManuals Editorial Team

Quick Answer

2023 Ford E-350 Super Duty Cutaway: 14.00 OZS. (0.41 L) — MOTORCRAFT PAG Refrigerant Compressor Oil / YN-12-D

GenerationYearsTop spec
2023202314.00 OZS. (0.41 L) — MOTORCRAFT PAG Refrigerant Compressor Oil / YN-12-D
2021-20222021-202214.00 OZS. (0.41 L) — MOTORCRAFT PAG Refrigerant Compressor Oil / YN-12-D
2017-20192017-20198.00 OZS. (0.23 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: Air Conditioning Compressor Oil (Prep package) 16.0 oz.

This vehicle's factory manual

Ford E-350 Super Duty Cutaway: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Ford E-350 Super Duty Cutaway maintenance schedule

Manual ReferenceFluid Capacities

Check fluid capacities information for your Ford E-350 Super Duty Cutaway

2023 Ford E-350 Super Duty Cutaway: 14.00 OZS. (0.41 L) — MOTORCRAFT PAG Refrigerant Compressor Oil / YN-12-D

Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.

Find Your Vehicle

Choose your year, model and configuration before using a specification or ordering parts. The example source may describe a different vehicle or trim.

Choose your vehicle manual above to confirm the engine and specification before ordering parts.
Air Cond Compressor Oil14.00 OZS. (0.41 L) — MOTORCRAFT PAG Refrigerant Compressor Oil / YN-12-D
Air Cond Refrigerant2.06 LBS. (0.93 KG) — R-134a
Automatic Transmission Fluid17.40 QTS. (16.46 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range.
Brake Fluid— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent.
Engine Coolant20.30 QTS. (19.21 L) — MOTORCRAFT Yellow Antifreeze/Coolant Prediluted Note: Approximate capacity.
Engine Oil8.00 QTS. (7.57 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil Note: SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).
Fuel Tank40.00 GALS. (151.41 L)
Windshield Washer Fluid— MOTORCRAFT Premium Windshield Washer Concentrate Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio.
Notes
  • →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range.
  • →Approximate capacity.
  • →SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).
  • →Follow the Manufacturer's Instructions for the mixture ratio.

2021-2022

Air Cond Compressor Oil14.00 OZS. (0.41 L) — MOTORCRAFT PAG Refrigerant Compressor Oil / YN-12-D
Air Cond Refrigerant2.06 LBS. (0.93 KG) — R-134a
Automatic Transmission Fluid17.00 QTS. (16.08 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range.
Brake Fluid— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent.
Differential Gear Oil3.28 QTS. (3.1 L) — Dana Limited Slip Axle M7OFF: MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Fluid. Dana Conventional Axle M7OGG: MOTORCRAFT SAE 80W-90 Premium Rear Axle Fluid Note: Fill Dana rear axles to 0.24-0.55 in (6-14 mm) below the bottom of the fill hole.
Engine Coolant20.30 QTS. (19.21 L) — MOTORCRAFT Yellow Antifreeze/Coolant Prediluted Note: Approximate capacity.
Engine Oil8.00 QTS. (7.57 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil Note: SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).
Fuel Tank40.00 GALS. (151.41 L)
Windshield Washer Fluid— MOTORCRAFT Premium Windshield Washer Concentrate Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio.
Notes
  • →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range.
  • →Fill Dana rear axles to 0.24-0.55 in (6-14 mm) below the bottom of the fill hole.
  • →Approximate capacity.
  • →SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).
  • →Follow the Manufacturer's Instructions for the mixture ratio.

2017-2019

Air Cond Compressor Oil8.00 OZS. (0.23 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: Air Conditioning Compressor Oil (Prep package) 16.0 oz.
Air Cond Refrigerant1.90 LBS. (0.86 KG) — R-134a
Automatic Transmission Fluid17.40 QTS. (16.46 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV
Brake Fluid— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage.
Differential Gear Oil6.60 PTS. (3.12 L) — MOTORCRAFT SAE 75W-90 Synthetic Rear Axle Lubricant Note: Fill to 1/4" to 9/16" below bottom of fill hole.
Engine Coolant (6.2L Eng)21.30 QTS. (20.15 L) — MOTORCRAFT Premium Gold Engine Coolant (yellow-colored) Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (6.2L Eng)7.00 QTS. (6.62 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend or Full Synthetic Motor Oil Note: To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
Fuel Tank40.00 GALS. (151.41 L)
Power Steering Fluid— MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Keep it in "full" range on dipstick.
Windshield Washer Fluid— MOTORCRAFT Premium Windshield Washer Concentrate Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio.
Differential Gear Oil (6.8L Eng)9.70 PTS. (4.58 L) — MOTORCRAFT SAE 75W-90 Synthetic Rear Axle Lubricant Note: Fill to 1/4" to 9/16" below bottom of fill hole.
Engine Coolant (6.8L Eng)30.40 QTS. (28.76 L) — MOTORCRAFT Premium Gold Engine Coolant (yellow-colored) Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (6.8L Eng)6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend or Full Synthetic Motor Oil Note: To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
Notes
  • →Air Conditioning Compressor Oil (Prep package) 16.0 oz.
  • →Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage.
  • →Fill to 1/4" to 9/16" below bottom of fill hole.
  • →Add the coolant type originally equipped in the vehicle.
  • →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
  • →Keep it in "full" range on dipstick.
  • →Follow the Manufacturer's Instructions for the mixture ratio.
Air Cond Compressor Oil8.00 OZS. (0.23 L) — MOTORCRAFT PAG Refrigerant Compressor Oil YN-12-D Note: Air Conditioning Compressor Oil (Prep package) 16.0 oz.
Air Cond Refrigerant1.90 LBS. (0.86 KG) — R-134a
Automatic Transmission Fluid (5.4L Eng)18.70 QTS. (17.69 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use only Automatic Transmission Fluid MERCON LV.
Brake Fluid— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage.
Differential Gear Oil6.60 PTS. (3.12 L) — MOTORCRAFT SAE 75W-90 Synthetic Rear Axle Lubricant Note: Fill to 1/4" to 9/16" below bottom of fill hole.
Engine Coolant (5.4L Eng)28.70 QTS. (27.16 L) — MOTORCRAFT Premium Gold Engine Coolant (yellow-colored) Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (5.4L Eng)6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend or Full Synthetic Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system.
Power Steering Fluid— MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Keep it in "full" range on dipstick.
Windshield Washer Fluid— MOTORCRAFT Premium Windshield Washer Concentrate Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio.
Automatic Transmission Fluid (6.8L Eng)17.40 QTS. (16.46 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use only Automatic Transmission Fluid MERCON LV.
Engine Coolant (6.8L Eng)30.40 QTS. (28.76 L) — MOTORCRAFT Premium Gold Engine Coolant (yellow-colored) Note: Add the coolant type originally equipped in the vehicle.
Engine Oil (6.8L Eng)6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-30 Premium Synthetic Blend or Full Synthetic Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system.
Notes
  • →Air Conditioning Compressor Oil (Prep package) 16.0 oz.
  • →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use only Automatic Transmission Fluid MERCON LV.
  • →Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage.
  • →Fill to 1/4" to 9/16" below bottom of fill hole.
  • →Add the coolant type originally equipped in the vehicle.
  • →Use of synthetic or synthetic blend motor oil is not mandatory. Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system.
  • →Keep it in "full" range on dipstick.
  • →Follow the Manufacturer's Instructions for the mixture ratio.
Air Cond Compressor Oil16.00 OZS. (0.47 L) — PAG 46
Air Cond Refrigerant1.88 LBS. (0.85 KG) — R-134a
Automatic Transmission Fluid (Trans Mfr CD 5R110W)19.20 QTS. (18.16 L) — MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use only Automatic Transmission Fluid MERCON LV.
Brake Fluid— MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. Note: Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage.
Differential Gear Oil6.60 PTS. (3.12 L) — MOTORCRAFT SAE 75W-90 Synthetic Rear Axle Lubricant Note: Fill to 1/4" to 9/16" below bottom of fill hole.
Engine Coolant (5.4L Eng)28.80 QTS. (27.25 L) — MOTORCRAFT Premium Gold Engine Coolant (yellow-colored) Note: Add the coolant type originally equipped in the vehicle.
Engine Oil6.00 QTS. (5.67 L) — MOTORCRAFT SAE 5W-20 Premium Synthetic Blend or Full Synthetic Motor Oil Note: Use of synthetic or synthetic blend motor oil is not mandatory. Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system.
Power Steering Fluid— MOTORCRAFT Automatic Transmission Fluid MERCON LV Note: Keep it in "full" range on dipstick.
Engine Coolant (6.8L Eng)30.40 QTS. (28.76 L) — MOTORCRAFT Premium Gold Engine Coolant (yellow-colored) Note: Add the coolant type originally equipped in the vehicle.
Notes
  • →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use only Automatic Transmission Fluid MERCON LV.
  • →Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage.
  • →Fill to 1/4" to 9/16" below bottom of fill hole.
  • →Add the coolant type originally equipped in the vehicle.
  • →Use of synthetic or synthetic blend motor oil is not mandatory. Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API Certification Mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system.
  • →Keep it in "full" range on dipstick.

Search for fluids

Choose the fluid you need. Check your vehicle, service procedure and manufacturer specification before buying; search results are not verified matches.

As an Amazon Associate, AllOEMManuals earns from qualifying purchases.

Fluids — Manual's Parts List

Everything for a full fluid service weekend.

Vehicle-Scoped Amazon Search

Opens Amazon with Ford E-350 Super Duty Cutaway prefilled so you can confirm fitment and avoid wrong parts.

Search Amazon; check fitment

Get everything at once

Search results vary; confirm each item and its fitment before buying.

See All on Amazon

Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.

One-Trip Shopping List

Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.

Frequently Asked Questions

Where is this data from?
Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
What fluid capacities does a Ford E-350 Super Duty Cutaway use?
2023 Ford E-350 Super Duty Cutaway: 14.00 OZS. (0.41 L) — MOTORCRAFT PAG Refrigerant Compressor Oil / YN-12-D
Why do fluid capacities vary by generation for the Ford E-350 Super Duty Cutaway?
Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.

Find your service manual

Select your vehicle and check the available manual sections for your exact configuration.

Author & Review

Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.

Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.

Last updated: 2026-11-09

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required