🧪Fluid Capacities

Chevrolet Traverse Premier Fluid Capacities

Factory manual fluid capacities for the Chevrolet Traverse Premier. Exact capacities and specs extracted from the LEMON service manual archive.

Last updated: 2026-10-28 • Reading time: 8 min • By AllOEMManuals Editorial Team

Quick Answer

2022-2023 Chevrolet Traverse Premier: 7.08 OZS. (0.2 L) — PAG 46

GenerationYearsTop spec
2022-20232022-20237.08 OZS. (0.2 L) — PAG 46
2020-20212020-20217.08 OZS. (0.2 L) — PAG 46
201920197.08 OZS. (0.2 L) — PAG 46

This vehicle's factory manual

The spec is above. This opens the 2022 Chevrolet Traverse Premier factory book. Use another year if yours is older.

Open the 2022 Chevrolet manual

Chevrolet Traverse Premier maintenance schedule

Factory Manual ConfirmationFluid Capacities

Know the exact fluid capacities job for your Chevrolet Traverse Premier

2022-2023 Chevrolet Traverse Premier: 7.08 OZS. (0.2 L) — PAG 46

Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.

Exact Vehicle Check

The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.

Open the factory manual above to confirm the exact engine before ordering parts.

2022-2023

Air Cond Compressor Oil7.08 OZS. (0.2 L) — PAG 46
Air Cond Refrigerant2.43 LBS. (1.1 KG) — R-1234yf Note: For further details see "Air conditioner specification label".
Automatic Transmission Fluid— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts.
Brake Fluid1.20 QTS. (1.13 L) — DOT 4 Hydraulic Brake Fluid
Differential Gear Oil0.79 QTS. (0.74 L) — DEXRON LS Hypoid Fluid
Engine Coolant15.50 QTS. (14.66 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil5.50 QTS. (5.2 L) — API - SAE 5W-30 Note: ACDelco dexos1 gen 3 full synthetic engine oil. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (4WD)21.70 GALS. (82.14 L)
Transfer Case Fluid0.90 QTS. (0.85 L) — SAE 75W-90 Synthetic Axle Gear Oil Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Fuel Tank (FWD)19.40 GALS. (73.43 L)
Notes
  • →For further details see "Air conditioner specification label".
  • →Fluid Capacity is between: 5.3 - 6.3 qts.
  • →Fluid Capacity is between: 9.0 - 10 qts.
  • →Fluid Capacity is between: 2.1 - 3.2 qts.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →ACDelco dexos1 gen 3 full synthetic engine oil. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.

2020-2021

Air Cond Compressor Oil7.08 OZS. (0.2 L) — PAG 46
Air Cond Refrigerant2.43 LBS. (1.1 KG) — R-1234yf Note: For further details see "Air conditioner specification label".
Automatic Transmission Fluid— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts.
Brake Fluid1.20 QTS. (1.13 L) — DOT 3 Hydraulic Brake Fluid
Differential Gear Oil0.79 QTS. (0.74 L) — DEXRON LS Hypoid Fluid
Engine Coolant15.50 QTS. (14.66 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil5.50 QTS. (5.2 L) — API - SAE 5W-30 Note: ACDelco dexos1 gen 3 full synthetic engine oil. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (4WD)21.70 GALS. (82.14 L)
Transfer Case Fluid0.90 QTS. (0.85 L) — SAE 75W-90 Synthetic Axle Gear Oil Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Fuel Tank (FWD)19.40 GALS. (73.43 L)
Notes
  • →For further details see "Air conditioner specification label".
  • →Fluid Capacity is between: 5.3 - 6.3 qts.
  • →Fluid Capacity is between: 9.0 - 10 qts.
  • →Fluid Capacity is between: 2.1 - 3.2 qts.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →ACDelco dexos1 gen 3 full synthetic engine oil. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Air Cond Compressor Oil7.08 OZS. (0.2 L) — PAG 46
Air Cond Refrigerant2.43 LBS. (1.1 KG) — R-1234yf Note: For further details see "Air conditioner specification label".
Automatic Transmission Fluid— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts.
Brake Fluid1.20 QTS. (1.13 L) — DOT 3 Hydraulic Brake Fluid
Differential Gear Oil0.79 QTS. (0.74 L) — DEXRON LS Hypoid Fluid
Engine Coolant (3.6L Eng)15.50 QTS. (14.66 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (3.6L Eng)6.00 QTS. (5.67 L) — API - SAE 5W-30 Note: ACDelco dexos1 gen 3 full synthetic engine oil. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (4WD)21.70 GALS. (82.14 L)
Transfer Case Fluid0.90 QTS. (0.85 L) — SAE 75W-90 Synthetic Axle Gear Oil Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Fuel Tank (FWD)19.40 GALS. (73.43 L)
Notes
  • →For further details see "Air conditioner specification label".
  • →Fluid Capacity is between: 5.3 - 6.3 qts.
  • →Fluid Capacity is between: 9.0 - 10 qts.
  • →Fluid Capacity is between: 2.1 - 3.2 qts.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →ACDelco dexos1 gen 3 full synthetic engine oil. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Air Cond Compressor Oil7.08 OZS. (0.2 L) — PAG 46
Air Cond Refrigerant2.43 LBS. (1.1 KG) — R-1234yf Note: For further details see "Air conditioner specification label".
Automatic Transmission Fluid— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 - 3.2 qts.
Brake Fluid1.20 QTS. (1.13 L) — DOT 3 Hydraulic Brake Fluid
Differential Gear Oil0.79 QTS. (0.74 L) — DEXRON LS Hypoid Fluid
Engine Coolant (3.6L Eng)15.50 QTS. (14.66 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (3.6L Eng)6.00 QTS. (5.67 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (4WD)21.70 GALS. (82.14 L)
Transfer Case Fluid0.90 QTS. (0.85 L) — SAE 75W-90 Synthetic Axle Gear Oil Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Fuel Tank (FWD)19.40 GALS. (73.43 L)
Notes
  • →For further details see "Air conditioner specification label".
  • →Fluid Capacity is between: 5.3 - 6.3 qts.
  • →Fluid Capacity is between: 9.0 - 10 qts.
  • →Fluid Capacity is between: 2.1 - 3.2 qts.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Air Cond Compressor Oil7.80 OZS. (0.23 L) — PAG 46
Air Cond Refrigerant2.50 LBS. (1.13 KG) — R-134a
Automatic Transmission Fluid— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid1.20 QTS. (1.13 L) — DOT 3 Hydraulic Brake Fluid
Differential Gear Oil0.85 QTS. (0.8 L) — SAE 75W-90 Synthetic Axle Gear Oil Note: GM Part No. 89021677.
Engine Coolant11.40 QTS. (10.78 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil5.50 QTS. (5.2 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Transfer Case Fluid1.06 QTS. (1 L) — SAE 75W-90 Synthetic Axle Gear Oil Note: GM Part No. 89021677. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Notes
  • →Fluid Capacity is between: 4.2 to 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 7.4 - 9.5 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →GM Part No. 89021677.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →GM Part No. 89021677. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.

Manual already checked Amazon for you

You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.

The Exact Part
Verified Fit

Chevrolet Traverse Premier Fluid Service Kit

Buy all the fluids your Chevrolet Traverse Premier needs in one cart.

We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.

Fluids — Manual's Parts List

Everything for a full fluid service weekend.

Vehicle-Scoped Amazon Search

Opens Amazon with Chevrolet Traverse Premier prefilled so you can confirm fitment and avoid wrong parts.

Check Fitment on Amazon

Get everything at once

One search shows all of the above on a single page.

See All on Amazon

Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.

One-Trip Shopping List

Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.

Frequently Asked Questions

Where is this data from?
Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
What fluid capacities does a Chevrolet Traverse Premier use?
2022-2023 Chevrolet Traverse Premier: 7.08 OZS. (0.2 L) — PAG 46
Why do fluid capacities vary by generation for the Chevrolet Traverse Premier?
Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.

Get the Complete Maintenance Schedule for Chevrolet Traverse Premier

Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.

Not sure you want to DIY? Compare local shop pricing first.

Author & Review

Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.

Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.

Last updated: 2026-10-28

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required