Chevrolet Corvette Headlight Bulb Size
Find the correct headlight bulb size for your Chevrolet Corvette. Covers low beam, high beam, fog lights, and turn signals for all years.
Last updated: 2026-05-07 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
The Chevrolet Corvette headlight bulb size depends on the model year and trim. Common sizes include H11 (low beam), 9005/HB3 (high beam), and H16 (fog lights) — see the full breakdown below.
| Generation | Years | Top spec |
|---|---|---|
| 2019-2024 | 2019-2024 | LED (factory) or H11 equivalent |
| 2013-2018 | 2013-2018 | LED (factory) or H11 equivalent |
| 2007-2012 | 2007-2012 | H11 or H7 |
Know the exact headlight bulb size job for your Chevrolet Corvette
The Chevrolet Corvette headlight bulb size depends on the model year and trim. Common sizes include H11 (low beam), 9005/HB3 (high beam), and H16 (fog lights) — see the full breakdown below.
Bulb size can change between reflector, projector, HID, LED, and market-specific housings. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
Use the archive navigator when you need the exact engine, trim, or production-branch manual instead of a broad year-range summary. That keeps the buying list and repair steps aligned with the real vehicle.
2007-2012
Representative 2007 manual branch for 2007-2012
Locations
TrailBlazer 2WD L6-4.2L
Cruise Control: Locations — 2007 Chevrolet TrailBlazer 2WD L6-4.2L Service Manual ~ LEMON Manuals LEMON Manuals: Repair Knowledge Reimagined Home >> Chevrolet >> 2007 >> TrailBlazer 2W...
Open factory section →Locations
TrailBlazer 2WD V8-5.3L
Cruise Control: Locations — 2007 Chevrolet TrailBlazer 2WD V8-5.3L Service Manual ~ LEMON Manuals LEMON Manuals: Repair Knowledge Reimagined Home >> Chevrolet >> 2007 >> TrailBlazer 2W...
Open factory section →2019-2024
2019-2024- →Factory LED headlights are not user-replaceable — the entire assembly may need replacement
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →LED upgrade bulbs are available but may cause CANBUS errors on some models
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
2013-2018
2013-2018- →Factory LED headlights are not user-replaceable — the entire assembly may need replacement
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →LED upgrade bulbs are available but may cause CANBUS errors on some models
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
2007-2012
2007-2012- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →LED upgrade bulbs are available but may cause CANBUS errors on some models
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
2001-2006
2001-2006- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1995-2000
1995-2000- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1989-1994
1989-1994- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1983-1988
1983-1988- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1977-1982
1977-1982- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1971-1976
1971-1976- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1965-1970
1965-1970- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1959-1964
1959-1964- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1953-1958
1953-1958- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
LED Upgrade Bulbs
Brighter, whiter light for better nighttime visibility.
Replacement Halogens
Standard OEM-spec bulbs for reliable replacement.
Dielectric Grease
Protects electrical connectors from moisture.
Latex-Free Gloves
Avoid fingerprints on the bulb and keep glass clean.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Chevrolet Corvette so the job is ready when the parts arrive.
Frequently Asked Questions
- What size headlight bulb does a Chevrolet Corvette use?
- The Chevrolet Corvette headlight bulb size varies by year. Newer models often use factory LED units, while older models use H11, H7, or 9006 halogen bulbs. Check the year-specific specs below for your exact fitment.
- Can I put LED bulbs in my Chevrolet Corvette?
- If your Chevrolet Corvette has halogen headlights, you can install LED replacement bulbs. Look for bulbs with a proper beam pattern (projector-compatible) to avoid blinding other drivers. Some models may need anti-flicker adapters.
- How do I replace the headlight bulb on a Chevrolet Corvette?
- On most Chevrolet Corvette models, you can access the headlight bulb from behind the headlight assembly in the engine bay. Twist the bulb socket counterclockwise, pull out the old bulb, insert the new one (don't touch the glass), and twist back in.
- Why does my Chevrolet Corvette headlight keep burning out?
- Frequent bulb burnout on the Chevrolet Corvette is usually caused by a loose connection, moisture in the housing, touching the bulb glass during installation, or a voltage regulator issue. Check the connector and housing seal.
Get the Complete Maintenance Schedule for Chevrolet Corvette
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Written by AllOEMManuals Editorial Team. Reviewed by ASE-certified technicians and updated with factory-reference checks for fitment-sensitive steps.
This guide was drafted with AI assistance and reviewed for accuracy by a human editor.
Last updated: 2026-05-07