Chevrolet Caprice 3.6L Eng VIN 3 Fluid Capacities
Factory fluid capacity for the Chevrolet Caprice 3.6L Eng VIN 3.
Last updated: 2026-10-28 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2017 Chevrolet Caprice 3.6L Eng VIN 3: 1.06 LBS. (0.48 KG) — HFC-134a (R-134a).
| Generation | Years | Top spec |
|---|---|---|
| 2017 | 2017 | 1.06 LBS. (0.48 KG) — HFC-134a (R-134a) |
| 2015-2016 | 2015-2016 | 4.70 OZS. (0.13 L) — PAG 46 |
This vehicle's factory manual
The spec is above. This opens the 2017 Chevrolet Caprice 3.6L Eng VIN 3 factory book. Use another year if yours is older.
Chevrolet Caprice 3.6L Eng VIN 3 maintenance schedule
Know the exact fluid capacities job for your Chevrolet Caprice 3.6L Eng VIN 3
2017 Chevrolet Caprice 3.6L Eng VIN 3: 1.06 LBS. (0.48 KG) — HFC-134a (R-134a).
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2017
- →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
- →Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
- →Follow the Manufacturer's Instructions for the mixture ratio. Use only fluid that meets regional freeze protection requirements.
2015-2016
- →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
- →Use only engine oil licensed to the dexos1 specification or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
- →Follow the Manufacturer's Instructions for the mixture ratio. Use only fluid that meets regional freeze protection requirements.
Manual already checked Amazon for you
You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.
Chevrolet Caprice 3.6L Eng VIN 3 Fluid Service Kit
Buy all the fluids your Chevrolet Caprice 3.6L Eng VIN 3 needs in one cart.
We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.
Fluids — Manual's Parts List
Everything for a full fluid service weekend.
- 1Engine OilShop →
Match viscosity to your spec
- 2CoolantShop →
Match color/chemistry — never mix types
- 3Long-Neck FunnelShop →
Transmission and differential fill holes are recessed
- 4Fluid Extraction PumpShop →
Remove old brake fluid from reservoir without mess
- 5Shop RagsShop →
You will need more than you think
Get everything at once
One search shows all of the above on a single page.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Chevrolet Caprice 3.6L Eng VIN 3 so the job is ready when the parts arrive.
Frequently Asked Questions
- What fluid capacities does a Chevrolet Caprice 3.6L Eng VIN 3 use?
- 2017 Chevrolet Caprice 3.6L Eng VIN 3: 1.06 LBS. (0.48 KG) — HFC-134a (R-134a).
- Why do fluid capacities vary by generation for the Chevrolet Caprice 3.6L Eng VIN 3?
- Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.
Get the Complete Maintenance Schedule for Chevrolet Caprice 3.6L Eng VIN 3
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-10-28