BMW i3 Fluid Capacities
Factory manual fluid capacities for the BMW i3. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-10-29 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2019-2021 BMW i3: — Refrigerant oil 1 Note: BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2.
| Generation | Years | Top spec |
|---|---|---|
| 2019-2021 | 2019-2021 | — Refrigerant oil 1 Note: BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2. |
| 2016-2018 | 2016-2018 | — Refrigerant oil 1 Note: BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2. |
| 2015 | 2015 | — Refrigerant oil 1 Note: BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2. |
This vehicle's factory manual
The spec is above. This opens the 2019 BMW i3 factory book. Use another year if yours is older.
Know the exact fluid capacities job for your BMW i3
2019-2021 BMW i3: — Refrigerant oil 1 Note: BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2.
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2019-2021
- →BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2.
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
2016-2018
- →BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2.
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
2015
- →BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2.
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Manual already checked Amazon for you
You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.
BMW i3 Fluid Service Kit
Buy all the fluids your BMW i3 needs in one cart.
We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.
Fluids — Manual's Parts List
Everything for a full fluid service weekend.
- 1Engine OilShop →
Match viscosity to your spec
- 2CoolantShop →
Match color/chemistry — never mix types
- 3Long-Neck FunnelShop →
Transmission and differential fill holes are recessed
- 4Fluid Extraction PumpShop →
Remove old brake fluid from reservoir without mess
- 5Shop RagsShop →
You will need more than you think
Get everything at once
One search shows all of the above on a single page.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your BMW i3 so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
- What fluid capacities does a BMW i3 use?
- 2019-2021 BMW i3: — Refrigerant oil 1 Note: BMW Part No. 81 22 9 407 724. This oil (Refrigerant oil 1) may not be mixed with refrigerant oil Sanden SP-A2.
- Why do fluid capacities vary by generation for the BMW i3?
- Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.
Get the Complete Maintenance Schedule for BMW i3
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-10-29