BMW 430i xDrive 2D Coupe Fluid Capacities
Factory fluid capacity for the BMW 430i xDrive 2D Coupe.
Last updated: 2026-11-09 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2022-2024 BMW 430i xDrive 2D Coupe: 1.20 LBS. (0.54 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790.
| Generation | Years | Top spec |
|---|---|---|
| 2022-2024 | 2022-2024 | 1.20 LBS. (0.54 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 |
| 2019-2020 | 2019-2020 | 1.20 LBS. (0.54 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 |
| 2017-2018 | 2017-2018 | 1.20 LBS. (0.54 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 |
This vehicle's factory manual
BMW 430i xDrive 2D Coupe: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
BMW 430i xDrive 2D Coupe maintenance schedule
Check fluid capacities information for your BMW 430i xDrive 2D Coupe
2022-2024 BMW 430i xDrive 2D Coupe: 1.20 LBS. (0.54 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790.
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Find Your Vehicle
Choose your year, model and configuration before using a specification or ordering parts. The example source may describe a different vehicle or trim.
2022-2024
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
2019-2020
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
2017-2018
- →The nameplate in the engine compartment indicates which refrigerant has been used.
- →BMW Part No. 83 22 2 365 988.
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
- →The suitable viscosity grade is indicated on a label in the engine compartment. Alternatively, also engine oils with viscosity grades SAE 5W-20, SAE 5W-30, SAE 0W-40 or SAE 5W-40 can be used.
- →Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Search for fluids
Choose the fluid you need. Check your vehicle, service procedure and manufacturer specification before buying; search results are not verified matches.
As an Amazon Associate, AllOEMManuals earns from qualifying purchases.
Fluids — Manual's Parts List
Everything for a full fluid service weekend.
- 1Engine OilShop →
Match viscosity to your spec
- 2CoolantShop →
Match color/chemistry — never mix types
- 3Long-Neck FunnelShop →
Transmission and differential fill holes are recessed
- 4Fluid Extraction PumpShop →
Remove old brake fluid from reservoir without mess
- 5Shop RagsShop →
You will need more than you think
Get everything at once
Search results vary; confirm each item and its fitment before buying.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your BMW 430i xDrive 2D Coupe so the job is ready when the parts arrive.
Frequently Asked Questions
- What fluid capacities does a BMW 430i xDrive 2D Coupe use?
- 2022-2024 BMW 430i xDrive 2D Coupe: 1.20 LBS. (0.54 KG) — R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790.
- Why do fluid capacities vary by generation for the BMW 430i xDrive 2D Coupe?
- Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.
Find your service manual
Select your vehicle and check the available manual sections for your exact configuration.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-11-09