BMW 230i xDrive Coolant Type
Factory manual coolant type & capacity for the BMW 230i xDrive. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-10-28 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2023-2024 BMW 230i xDrive coolant: 8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)..
| Generation | Years | Top spec |
|---|---|---|
| 2023-2024 | 2023-2024 | 8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts). |
| 2017-2021 | 2017-2021 | 3.80 QTS. (3.59 L) — Frostox HT-12 antifreeze and corrosion inhibitor |
This vehicle's factory manual
The spec is above. This opens the 2023 BMW 230i xDrive factory book. Use another year if yours is older.
BMW 230i xDrive maintenance schedule
Know the exact coolant type job for your BMW 230i xDrive
2023-2024 BMW 230i xDrive coolant: 8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)..
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2023-2024
- →Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
2017-2021
Manual already checked Amazon for you
You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.
BMW 230i xDrive coolant
Get the exact coolant chemistry your BMW 230i xDrive needs. Wrong coolant = sludge and overheating.
We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.
Coolant Service — Manual's Parts List
Flush or top-off — here is exactly what you need.
- 1Engine CoolantShop →
8.56 QTS. (8.1 L) — Frostox HT — verify concentrate vs pre-mixed
- 2Distilled WaterShop →
If using concentrate — never use tap water
- 3Spill-Free FunnelShop →
Bleeds air from the heater core automatically
- 4Hose Clamp PliersShop →
Spring clamps are a pain without these
- 5Shop RagsShop →
Coolant is slippery — clean spills immediately
Get everything at once
One search shows all of the above on a single page.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Engine Coolant / Antifreeze
Match the color/spec (e.g. OAT, HOAT) to your car.
Spill-Free Funnel
The best way to bleed air from the cooling system.
Coolant Tester
Check the freeze and boil protection level.
Hose Clamp Pliers
Helps move spring clamps without mangling hoses.
Shop Towels
Cleanup gear for coolant drips and burps.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your BMW 230i xDrive so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
- What coolant type does a BMW 230i xDrive use?
- 2023-2024 BMW 230i xDrive coolant: 8.56 QTS. (8.1 L) — Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)..
- Can I use universal coolant in a BMW 230i xDrive?
- Factory manuals specify exact coolant chemistry for the BMW 230i xDrive. Using the wrong coolant type can cause corrosion, overheating, or gasket damage. Always match the OEM specification exactly — do not mix incompatible coolant types.
Get the Complete Maintenance Schedule for BMW 230i xDrive
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-10-28