DIY repair guide for 2015 Chevrolet Trax
How to Replace the Water Pump on a 2015 Chevrolet Trax
How to Replace the Water Pump on a 2015 Chevrolet Trax. The quick answer is below, then the longer procedure, parts, and factory references.
Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick answer
Start with the exact fitment check
This page keeps the water pump replacement fitment, timing, and procedure notes close to the top so the vehicle stays in view while you work.
Direct answer
Confirm the repair data before ordering
Check the manual for your 2015 Chevrolet Trax to confirm that this procedure applies to its engine and configuration before ordering parts or starting work.
- • Difficulty: Intermediate to Advanced
- • Time: 2-4 hours
- • Primary part: Water pump
- • Drain system completely
Before you order
Use the fitment checks already on this page
Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.
- • Amazon results open in a new tab so you can keep this repair flow visible.
- • Confirm engine, trim, and production split before checkout.
- • Use the warnings and torque notes below as your final pre-order check.
Next step
Keep the exact vehicle hub open
The hub keeps repair, wiring, codes, and manual paths in the same context while you compare the next move.
- • Use the vehicle notes above for any exact-fit caveat before teardown.
- • Use the service notes on this page for torque and order of operations.
- • Use the linked manual if you need a factory reference for access or routing.
This vehicle's factory manual
2015 Chevrolet Trax: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Exact-fit quick check
2015 Chevrolet Trax 1.4L Turbo Water Pump Replacement — Timing-Belt-Driven Specs
The 2015 Trax 1.4L LE2 uses a water pump driven by the timing belt, mounted on the front of the engine block behind the timing cover. This is NOT a serpentine-belt-driven pump — replacing it requires timing belt removal and re-timing the camshafts. If you're at water pump failure mileage (80K+), replace the timing belt, tensioner, and idler pulley at the same time.
OEM water pump: ACDelco 252-933 (GM 251-933; includes gasket and O-ring).
Aftermarket: Gates 44087 or GMB 146-2360; verify gasket and bolts included.
Pump bolts: M6 x 1.0 (×7), torque 18 N·m (13 ft-lb) — 10mm socket.
Timing belt: ACDelco TB330 (GM 55574864); replace with pump — 80,000-100,000 mile interval.
Tensioner: ACDelco T43115 (GM 55574863); replace with belt — do NOT reuse.
Coolant: DEX-COOL 50/50; capacity ~6.5 qt; flush system before refill.
Cam timing: LE2 is DOHC with variable valve timing — MUST lock cams with timing tools before belt removal.
Exact-fit parts
Parts You'll Need
Vehicle-specific part numbers and quantities pulled from the factory service manual data for this repair.
OEM GM 251-933; includes gasket and O-ring
GM 55574864; replace with pump
GM 55574863; replace with belt
Replace if bearing is rough
DEX-COOL 50/50; 6.5 qt total capacity
Shop prep
Tools Required
Gather these exact sizes and tools before you start — the manual calls each one out for a reason.
Socket set
10mm, 13mm, 15mm, 18mm, 19mm · 10mm pump bolts, various for covers and crank pulley
Torque wrench
3/8" drive · Must read 13 ft-lb and 37+ ft-lb accurately
Timing tool kit
N/A · LE2 cam locking tools (e.g., AST 4503 or equivalent)
Harmonic balancer puller
N/A · Required to remove crank pulley for timing cover
Drain pan
10 qt minimum · Catch coolant from block and radiator
Safety-critical values
Torque Specifications
These are factory torque values from the OEM service manual. Overtightening can strip threads; undertightening can cause leaks or component failure.
| Component | Torque Value |
|---|---|
| Water pump bolts | 18 N·m (13 ft-lb) |
| Crankshaft pulley bolt | 74 ft-lb + 30° |
Check the procedure for your vehicle
A year and model alone may not identify the correct repair. Match the engine, drivetrain and equipment to the service manual before using the overview below.
Match your vehicle
Check the VIN, engine and drivetrain against the manual. Different configurations can use different components and procedures.
Confirm the service details
Use the matching service procedure for access, fastener specifications and service sequence. General time and cost estimates do not establish applicability.
Manual and spec cross-checks
Use the linked manual and spec paths to verify fitment, torque, and service order before teardown.
Related Pages
More resources for this repair
Browse related vehicle pages, model guides, and other water pump replacement resources.
Vehicle hub
2015 Chevrolet Trax Repair Hub
See all repairs, wiring diagrams, and codes for your 2015 Chevrolet Trax.
Model cluster
Chevrolet Trax Guides
Browse all repair guides for the Chevrolet Trax.
Repair family
All water pump replacement guides
See water pump replacement guides for every vehicle we cover.
More water pump replacement guides
Symptom routing
Priority symptom hubs that lead to this repair
These report-backed symptom hubs are the strongest plain-English entry points into this repair path, related codes, and exact vehicle troubleshooting.
Code reinforcement
Related Trouble Codes
These check engine light codes are often connected to this repair.
Best first step for this repair
Search parts and confirm fitment
Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.
Amazon results open in a new tab so you can keep this repair flow visible.
Confirm engine, trim, and production split before checkout.
Use the warnings and torque notes below as your final pre-order check.
Need the walkthrough?
Open full repair guide
Load the interactive guide only when you want the expanded walkthrough, extra specs, and the vehicle health snapshot.
No signup required. Loads only when requested for a faster first page view.
Start here with the short guide, then open the full version if you need more detail.
At a glance
The core information most people want before deciding whether to do this repair themselves.
DIY parts cost: $80-250
Difficulty
Intermediate to Advanced
Time
2-4 hours
Parts
4 items
Compare costs
Get a vehicle-specific estimate
Safety Warnings
- •Drain system completely
- •Check for bearing play before removing
- •Use proper sealant
Tools required
Gather these before you start so the job flows cleanly once the vehicle is apart. Click any tool to shop it on Amazon.
Parts searches: confirm fitment
These links open search results, not a verified parts list. Confirm the part number, engine, trim, and production split before ordering.
We surface the most relevant part number, OEM reference, or spec we have for this job so you can compare listings with higher confidence.
Bundle everything
Shop the complete water pump replacement kit
Pads, rotors, hardware, fluids, and tools — one search for the whole job.
Fastest parts to verify before checkout
Use these quick searches when you want the main replacement item first and the support pieces second.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
What the Pros Prefer: 2015 Chevrolet Trax Water Pump Workflow
Controlled coolant capture, mating surface prep, and cooling system purging.
Pulley Bolt Pre-Loosening & Coolant Drain
Shop Tip:Loosen the water pump pulley mounting bolts 1 turn while the serpentine belt is still under full tension. The belt grip prevents the pulley from spinning freely in your hand.
Pump Extraction & Catch Pan Placement
Shop Tip:Place your drain bucket directly beneath the pump before unbolting. Significant trapped coolant remains behind the pump cavity even after draining the radiator.
Mating Surface Decontamination
Shop Tip:Scrape all residual paper and dried RTV until the aluminum surface is clean, smooth, and dry. Wipe with brake cleaner so the new gasket bonds flat.
Torque Pattern & Air Bleed Funnel
Shop Tip:Small M6 and M8 water pump bolts have low torque ratings (7–15 lb-ft). Overtightening snaps bolts in the block. Use a spill-free funnel to purge air pockets on refill.
Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases on tool links at no extra cost to you.
Basic procedure overview
This is the short version of the job flow. The AI guide below fills in torque specs, access details, and vehicle-specific cautions.
- 1Drain cooling system
- 2Remove serpentine belt
- 3Remove pump pulley
- 4Remove pump bolts
- 5Clean mounting surface
- 6Install new pump with gasket
Frequently asked questions
- How much does water pump replacement cost for a 2015 Chevrolet Trax?
- The general parts estimate shown here is $80-250. It is not a quote for your 2015 Chevrolet Trax's exact engine or configuration. Confirm the required parts and supplies in the matching manual, compare current prices, and get a written shop estimate that identifies the work and labor included.
- How long does water pump replacement take on a 2015 Chevrolet Trax?
- A water pump replacement on a 2015 Chevrolet Trax typically takes 2-4 hours for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.
- Can I do water pump replacement myself on a 2015 Chevrolet Trax?
- A water pump replacement on a 2015 Chevrolet Trax is rated Intermediate to Advanced. It's doable for experienced DIYers with a good tool set, but beginners may want professional help. Expect it to take 2-4 hours.
- What tools do I need for water pump replacement on a 2015 Chevrolet Trax?
- For water pump replacement on a 2015 Chevrolet Trax you'll need: Drain pan, Socket set, Pulley puller, Torque wrench, RTV sealant. You'll also need the correct replacement parts: Water pump, Water pump gasket, Coolant, and 1 more item.
- What happens if I delay water pump replacement on my 2015 Chevrolet Trax?
- A failing water pump will cause your 2015 Chevrolet Trax to overheat. Continued driving with a bad water pump can warp the cylinder head or blow the head gasket—repairs that cost $1,500–$3,000+.
- Does the 2015 Chevy Trax 1.4L have a timing belt or chain?
- The 2015 Trax 1.4L LE2 uses a timing belt that drives the water pump. The belt and water pump should be replaced together at 80,000-100,000 miles. This is an interference engine — if the belt breaks, valves contact pistons. Cam timing tools are required for correct reassembly.
Get the Full AI-Powered Repair Guide
Use the expanded guide alongside the service manual for your 2015 Chevrolet Trax. Confirm specifications, parts and procedure for your engine before starting.
Unlimited AI repair guides for every vehicle. No signup required. Veteran-owned.