DIY repair guide for 2013 Nissan Rogue
How to Replace the Radiator on a 2013 Nissan Rogue
How to Replace the Radiator on a 2013 Nissan Rogue. The quick answer is below, then the longer procedure, parts, and factory references.
Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick answer
Start with the exact fitment check
This page keeps the radiator replacement fitment, timing, and procedure notes close to the top so the vehicle stays in view while you work.
Direct answer
Confirm the repair data before ordering
Check the manual for your 2013 Nissan Rogue to confirm that this procedure applies to its engine and configuration before ordering parts or starting work.
- • Difficulty: Intermediate
- • Time: 2-3 hours
- • Primary part: Radiator
- • Never open hot cooling system
Before you order
Use the fitment checks already on this page
Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.
- • Amazon results open in a new tab so you can keep this repair flow visible.
- • Confirm engine, trim, and production split before checkout.
- • Use the warnings and torque notes below as your final pre-order check.
Next step
Keep the exact vehicle hub open
The hub keeps repair, wiring, codes, and manual paths in the same context while you compare the next move.
- • Use the vehicle notes above for any exact-fit caveat before teardown.
- • Use the service notes on this page for torque and order of operations.
- • Use the linked manual if you need a factory reference for access or routing.
This vehicle's factory manual
2013 Nissan Rogue: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Exact-fit quick check
2013 Rogue S35 2.5L radiator & CVT cooler replacement
The 2013 Rogue S35 with the 2.5L QR25DE uses a plastic-aluminum radiator that includes a CVT transmission oil cooler cast into the driver side tank. Replacement requires Nissan 21460-JM00A or TYC 2988; the CVT cooler lines must be disconnected with care to avoid cracking the plastic tank.
Radiator: Nissan 21460-JM00A or Spectra CU13459 — with CVT cooler on driver tank; 2-row aluminum core
Upper bolts (4): 10 mm — torque 4.3 ft-lb (6 N·m) into upper core support brackets
Lower mounts: Rubber insulator bushings on pegs — no fasteners; lift straight up after disconnecting hoses
Coolant: Nissan L255 blue Long Life — capacity 1.9 gal (7.2 L) for 2.5L with CVT cooler
CVT cooler lines: 19 mm flare nuts — use flare wrench; catch NS-2 CVT fluid separately in clean pan
Fan shroud: Unclip two wiring harness retainers, remove four 10 mm bolts, lift fan/shroud assembly as one unit
Tip: The plastic upper tank has a fragile CVT cooler port boss — support the tank when loosening cooler lines; never twist the hose against the tank
Exact-fit parts
Parts You'll Need
Vehicle-specific part numbers and quantities pulled from the factory service manual data for this repair.
With CVT cooler for 2.5L S35
1.1 bar pressure cap
Blue long life 50/50
NS-2 for lost cooler fluid
Shop prep
Tools Required
Gather these exact sizes and tools before you start — the manual calls each one out for a reason.
Socket
10 mm · Upper bolts and fan shroud
Flare wrench
19 mm · CVT cooler line nuts
Pliers
n/a · Hose clamps
Drain pan
3 gal minimum · Separate coolant and CVT fluid
Torque wrench
1/4 drive · 4.3 ft-lb upper bolts
Safety-critical values
Torque Specifications
These are factory torque values from the OEM service manual. Overtightening can strip threads; undertightening can cause leaks or component failure.
| Component | Torque Value |
|---|---|
| Radiator upper bolts | 4.3 ft-lb (6 N·m) |
| CVT cooler line nuts | 18 ft-lb (24 N·m) |
Check the procedure for your vehicle
A year and model alone may not identify the correct repair. Match the engine, drivetrain and equipment to the service manual before using the overview below.
Match your vehicle
Check the VIN, engine and drivetrain against the manual. Different configurations can use different components and procedures.
Confirm the service details
Use the matching service procedure for access, fastener specifications and service sequence. General time and cost estimates do not establish applicability.
Manual and spec cross-checks
Use the linked manual and spec paths to verify fitment, torque, and service order before teardown.
Symptom routing
Priority symptom hubs that lead to this repair
These report-backed symptom hubs are the strongest plain-English entry points into this repair path, related codes, and exact vehicle troubleshooting.
Code reinforcement
Related Trouble Codes
These check engine light codes are often connected to this repair.
Best first step for this repair
Search parts and confirm fitment
Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.
Amazon results open in a new tab so you can keep this repair flow visible.
Confirm engine, trim, and production split before checkout.
Use the warnings and torque notes below as your final pre-order check.
Need the walkthrough?
Open full repair guide
Load the interactive guide only when you want the expanded walkthrough, extra specs, and the vehicle health snapshot.
No signup required. Loads only when requested for a faster first page view.
Start here with the short guide, then open the full version if you need more detail.
At a glance
The core information most people want before deciding whether to do this repair themselves.
DIY parts cost: $150-400
Difficulty
Intermediate
Time
2-3 hours
Parts
4 items
Compare costs
Get a vehicle-specific estimate
Safety Warnings
- •Never open hot cooling system
- •Coolant is toxic to pets
- •Bleed air from system after refill
Tools required
Gather these before you start so the job flows cleanly once the vehicle is apart. Click any tool to shop it on Amazon.
Parts searches: confirm fitment
These links open search results, not a verified parts list. Confirm the part number, engine, trim, and production split before ordering.
We surface the most relevant part number, OEM reference, or spec we have for this job so you can compare listings with higher confidence.
Bundle everything
Shop the complete radiator replacement kit
Pads, rotors, hardware, fluids, and tools — one search for the whole job.
Fastest parts to verify before checkout
Use these quick searches when you want the main replacement item first and the support pieces second.
Radiator hoses (inspect)
Amazon results for 2013 Nissan Rogue Radiator hoses (inspect)
Open fitment search →When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
What the Pros Prefer: 2013 Nissan Rogue Radiator Replacement
Professional 4-step job flow, tool sizes, and certified technician best practices.
Job Preparation & Access Clearance
Shop Tip:Clear dust and road grime from the working area before loosening hardware. Protect eyes and hands from fluids and sharp metal edges.
Fastener Extraction & Component Disassembly
Shop Tip:Apply penetrating spray to heat-cycled or rusted bolts 10 minutes prior to removal. Use 6-point sockets to avoid rounding off bolt heads.
Mating Surface Inspection & Cleaning
Shop Tip:Clean all mounting surfaces to bare metal. Verify that old gaskets, O-rings, and crush washers are fully removed before installing new parts.
Final Torque & Operational Verification
Shop Tip:Torque fasteners to factory OEM specifications in an alternating star or criss-cross pattern to ensure uniform clamping pressure.
Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases on tool links at no extra cost to you.
Basic procedure overview
This is the short version of the job flow. The AI guide below fills in torque specs, access details, and vehicle-specific cautions.
- 1Drain coolant into pan
- 2Disconnect hoses and transmission cooler lines
- 3Remove mounting hardware
- 4Remove old radiator
- 5Install new radiator
- 6Reconnect hoses and refill system
Frequently asked questions
- How much does radiator replacement cost for a 2013 Nissan Rogue?
- The general parts estimate shown here is $150-400. It is not a quote for your 2013 Nissan Rogue's exact engine or configuration. Confirm the required parts and supplies in the matching manual, compare current prices, and get a written shop estimate that identifies the work and labor included.
- How long does radiator replacement take on a 2013 Nissan Rogue?
- A radiator replacement on a 2013 Nissan Rogue typically takes 2-3 hours for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.
- Can I do radiator replacement myself on a 2013 Nissan Rogue?
- A radiator replacement on a 2013 Nissan Rogue is rated Intermediate. If you have some DIY experience and the right tools, you can do it yourself in about 2-3 hours. First-timers should budget extra time and watch a tutorial first.
- What tools do I need for radiator replacement on a 2013 Nissan Rogue?
- For radiator replacement on a 2013 Nissan Rogue you'll need: Drain pan, Pliers, Socket set, Funnel. You'll also need the correct replacement parts: Radiator, Coolant, Radiator hoses (inspect), and 1 more item.
- What happens if I delay radiator replacement on my 2013 Nissan Rogue?
- A leaking radiator will cause your 2013 Nissan Rogue to overheat, risking head gasket failure ($1,000–$2,500+) or a warped cylinder head. Coolant loss can happen quickly and leave you stranded.
- How do you replace the radiator on a 2013 Nissan Rogue 2.5L?
- Drain the coolant, disconnect the upper and lower hoses, then use a 19 mm flare wrench to carefully remove the CVT cooler lines from the driver side tank. Remove four 10 mm upper bolts and lift the fan/shroud assembly. The radiator sits on two lower rubber insulators — lift straight up. Torque upper bolts to 4.3 ft-lb and cooler lines to 18 ft-lb.
Get the Full AI-Powered Repair Guide
Use the expanded guide alongside the service manual for your 2013 Nissan Rogue. Confirm specifications, parts and procedure for your engine before starting.
Unlimited AI repair guides for every vehicle. No signup required. Veteran-owned.