DIY repair guide for 2013 Nissan Murano
Cabin air filter replacement Guide — 2013 Nissan Murano
Start with the exact-fit quick answer below, then open the full guide when you want the longer procedure, parts, and factory references.
Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick answer
Filter jobs are won by size, access, and airflow direction
This page keeps the exact filter fitment, access path, and install direction close to the top so the job stays quick.
Direct answer
Confirm cabin filter size and airflow arrow
2013 Nissan Murano filter service is straightforward once you know the exact filter path and access point.
- • Filter part: Cabin air filter
- • Confirm the filter size before checkout.
- • Check the access panel or glove box path first.
- • Install with the airflow arrow pointing the right way.
Before you order
Use the exact vehicle path and replacement interval
The fitment and access notes already on this page are the ones to trust before you buy.
- • Keep the replacement interval and access notes visible while you compare listings.
- • Use the vehicle-specific manual path when the housing or glove-box access is tight.
- • Clear out dust or debris in the housing before installing the new cabin filter.
Next step
Pair the filter page with the rest of the maintenance cluster
Filter pages work best when they stay linked to the rest of the maintenance stack owners often batch together.
- • Keep the vehicle hub open so the matching maintenance paths stay visible.
- • Open the oil page if you are batching a service reset or a wider maintenance visit.
This vehicle's factory manual
2013 Nissan Murano: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Exact-fit quick check
2013 Nissan Murano — Behind-Glove-Box Cabin Filter Swap
The 2013 Murano's cabin filter is a single pleated panel located behind the glove box. It filters pollen, dust, and cabin odors before air reaches the evaporator. Nissan recommends replacement every 15,000 miles in severe driving conditions.
Filter spec: Nissan 27277-1CA0A or Fram CF11776 — 9.1 x 8.3 x 1.0 inches
Location: Behind the glove box; push both sides inward to release the damper stops and lower the box
Cover: Plastic clip-on tray behind the glove box — unclip the top tabs and slide out
Airflow direction: Arrow points DOWN (toward floor) — follow marking on filter frame
No tools needed; the glove box damper strut can be unhooked for easier access
If the filter is gray or has debris, check the intake cowl grilles at the base of the windshield for leaves
Dual-zone auto climate control models may have a second filter tray if equipped with the Advanced Climate Control
Exact-fit parts
Parts You'll Need
Vehicle-specific part numbers and quantities pulled from the factory service manual data for this repair.
Also Fram CF11776 or Wix 24887
Check the procedure for your vehicle
A year and model alone may not identify the correct repair. Match the engine, drivetrain and equipment to the service manual before using the overview below.
Match your vehicle
Check the VIN, engine and drivetrain against the manual. Different configurations can use different components and procedures.
Confirm the service details
Use the matching service procedure for access, fastener specifications and service sequence. General time and cost estimates do not establish applicability.
Manual and spec cross-checks
Use the linked manual and spec paths to verify fitment, torque, and service order before teardown.
Symptom routing
Priority symptom hubs that lead to this repair
These report-backed symptom hubs are the strongest plain-English entry points into this repair path, related codes, and exact vehicle troubleshooting.
Best first step for this repair
Search parts and confirm fitment
Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.
Amazon results open in a new tab so you can keep this repair flow visible.
Confirm engine, trim, and production split before checkout.
Use the warnings and torque notes below as your final pre-order check.
Need the walkthrough?
Open full repair guide
Load the interactive guide only when you want the expanded walkthrough, extra specs, and the vehicle health snapshot.
No signup required. Loads only when requested for a faster first page view.
Start here with the short guide, then open the full version if you need more detail.
At a glance
The core information most people want before deciding whether to do this repair themselves.
DIY parts cost: $15-40
Difficulty
Easy
Time
10-20 minutes
Parts
1 items
Compare costs
Get a vehicle-specific estimate
Safety Warnings
- •Note filter direction arrow
- •Clean housing before installing new filter
Tools required
Gather these before you start so the job flows cleanly once the vehicle is apart. Click any tool to shop it on Amazon.
Parts searches: confirm fitment
These links open search results, not a verified parts list. Confirm the part number, engine, trim, and production split before ordering.
We surface the most relevant part number, OEM reference, or spec we have for this job so you can compare listings with higher confidence.
Bundle everything
Shop the complete cabin air filter replacement kit
Pads, rotors, hardware, fluids, and tools — one search for the whole job.
Fastest parts to verify before checkout
Use these quick searches when you want the main replacement item first and the support pieces second.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
What the Pros Prefer: 2013 Nissan Murano Cabin Air Filter Workflow
Glovebox damper protection, leaf debris clearance, and airflow arrow orientation.
Damper Cord Detachment
Shop Tip:Unhook the soft-drop damper cord on the right side of the glovebox first. Forcing the glovebox down without unhooking snaps the plastic damper arm.
Glovebox Stopper Tab Release
Shop Tip:Squeeze the left and right inner sidewalls of the glovebox firmly inward to clear the rubber stopping tabs, then let the glovebox swing downward freely.
Filter Access Door & Cavity Vacuuming
Shop Tip:Pine needles, dried leaves, and seeds sit on top of the old filter. Vacuum the shelf clean as you slide the old filter out so debris does not fall directly into the blower wheel.
Activated Carbon Filter Alignment
Shop Tip:Align the "AIR FLOW ↓" arrow to point toward the blower motor. Ensure filter pleats are not bunched or folded on the edges before snapping the access door shut.
Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases on tool links at no extra cost to you.
Basic procedure overview
This is the short version of the job flow. The AI guide below fills in torque specs, access details, and vehicle-specific cautions.
- 1Locate cabin filter (usually behind glove box)
- 2Remove access panel
- 3Slide out old filter
- 4Install new filter with arrow pointing correct direction
- 5Reinstall panel
Frequently asked questions
- How much does cabin air filter replacement cost for a 2013 Nissan Murano?
- The general parts estimate shown here is $15-40. It is not a quote for your 2013 Nissan Murano's exact engine or configuration. Confirm the required parts and supplies in the matching manual, compare current prices, and get a written shop estimate that identifies the work and labor included.
- How long does cabin air filter replacement take on a 2013 Nissan Murano?
- A cabin air filter replacement on a 2013 Nissan Murano typically takes 10-20 minutes for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.
- Can I do cabin air filter replacement myself on a 2013 Nissan Murano?
- Yes, a cabin air filter replacement on a 2013 Nissan Murano is rated Easy and is a great beginner DIY project. You'll need basic hand tools and about 10-20 minutes.
- What tools do I need for cabin air filter replacement on a 2013 Nissan Murano?
- For cabin air filter replacement on a 2013 Nissan Murano you'll need: Screwdriver (possibly), Flashlight. You'll also need the correct replacement parts: Cabin air filter.
- What happens if I delay cabin air filter replacement on my 2013 Nissan Murano?
- A clogged cabin air filter in your 2013 Nissan Murano reduces HVAC airflow, causes musty odors, and can fog up windows. It also makes the blower motor work harder, shortening its life.
- Where is the cabin air filter on a 2013 Nissan Murano?
- The 2013 Nissan Murano cabin air filter is located behind the glove box. Push both sides of the glove box inward to release the stops and lower it down. The filter sits in a plastic tray directly behind the glove box with top clips. Use Nissan 27277-1CA0A or Fram CF11776, with the airflow arrow pointing down.
Get the Full AI-Powered Repair Guide
Use the expanded guide alongside the service manual for your 2013 Nissan Murano. Confirm specifications, parts and procedure for your engine before starting.
Unlimited AI repair guides for every vehicle. No signup required. Veteran-owned.