DIY repair guide for 2013 Jeep Compass
Oil change Guide — 2013 Jeep Compass
Start with the exact-fit quick answer below, then open the full guide when you want the longer procedure, parts, and factory references.
Related manual matches
Manual sections related to oil change
These search matches may cover different variants or procedures. Open each section and confirm that it applies to your 2013 Jeep Compass before using its specifications.
Related manual section
Engine Oil Replacement Reminder - Engine Oil Replacement Reminder Reset - Procedure 02 — Limited, AWD, Trans Mfr CD CVT2
2013Engine Oil Replacement Reminder Reset - Procedure 02 NOTE: The manufacturer describes this procedure as a "Secondary Method For Oil Change Reset". This method may not be appropriate for all vehicles. Without pushing the brake pedal, push the engine START/STOP button and cycle the ignition to the...
Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick answer
Oil service is about the exact spec, not the generic label
This page keeps the viscosity, capacity, filter, and drain-plug checks together so owners can order confidently and move quickly.
Direct answer
Confirm the exact oil spec before checkout
2013 Jeep Compass oil service is only simple when the oil type, capacity, and filter match the vehicle data.
- • Use the exact oil viscosity and capacity shown on the page before you order.
- • Oil/filter kit starts with: Engine oil (check owner's manual for type/quantity)
- • Keep the drain plug torque and change-interval notes in view while you work.
- • Approved brands and filter part details belong in the final fitment check, not the guesswork stage.
Before you order
Make the service method match the car
Oil jobs fail when the buyer grabs the wrong drain hardware or ignores the service method the car actually uses.
- • Confirm the filter and drain hardware listed on the page before checkout.
- • Use the service notes for your exact vehicle rather than a generic oil recommendation.
- • Keep the change interval and approved-brand notes on screen while you compare listings.
Next step
Oil service pairs well with the other maintenance lanes
When owners are already under the hood, air filters and spark plugs are often the next useful checks.
- • Use the vehicle hub to keep the broader maintenance cluster visible.
- • Check the related filter and ignition pages if you are batching maintenance.
This vehicle's factory manual
2013 Jeep Compass: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Exact-fit quick check
2013 Jeep Compass — 4.5 qt 5W-20 World Engine Oil Change
The 2013 Compass uses the Chrysler World Engine in 2.0L or 2.4L flavors. Both use the same cartridge-style filter mounted on the passenger side of the block and share a 4.5-quart capacity. The 2.4L with the CVT can also use 0W-20 for slight fuel economy gains.
Engine oil capacity: 4.5 qt (4.3L) with filter for both 2.0L and 2.4L
Oil spec: 5W-20 API SN / MS-6395 for 2.0L; 5W-20 or 0W-20 for 2.4L (check owner's manual sticker)
Oil filter: Mopar 04884899AC (cartridge element) or Bosch 3330 — filter cap is 24mm
Drain plug torque: 20 ft-lb (27 N·m) — 13mm hex head on aluminum pan
Filter cap torque: 18 ft-lb (25 N·m) — 24mm socket on plastic cap
The oil filter housing is on the passenger side, low on the block — access from below or through the wheel well
Reset oil change indicator: Turn key to RUN, press gas pedal to floor 3 times within 10 seconds, turn key OFF
Exact-fit parts
Parts You'll Need
Vehicle-specific part numbers and quantities pulled from the factory service manual data for this repair.
Cartridge element for 2.0L and 2.4L World Engine
MS-6395 spec; buy 5 qt to cover 4.5 qt capacity
Nylon washer for 13mm drain plug
Shop prep
Tools Required
Gather these exact sizes and tools before you start — the manual calls each one out for a reason.
Socket wrench
3/8-inch drive · Drain plug and filter cap
Socket
13mm · Oil drain plug
Socket
24mm · Oil filter housing cap
Torque wrench
3/8-inch drive · 20 ft-lb drain plug, 18 ft-lb cap
Safety-critical values
Torque Specifications
These are factory torque values from the OEM service manual. Overtightening can strip threads; undertightening can cause leaks or component failure.
| Component | Torque Value |
|---|---|
| Oil drain plug | 20 ft-lb (27 N·m) |
| Oil filter housing cap | 18 ft-lb (25 N·m) |
Check the procedure for your vehicle
A year and model alone may not identify the correct repair. Match the engine, drivetrain and equipment to the service manual before using the overview below.
Match your vehicle
Check the VIN, engine and drivetrain against the manual. Different configurations can use different components and procedures.
Confirm the service details
Use the matching service procedure for access, fastener specifications and service sequence. General time and cost estimates do not establish applicability.
Manual and spec cross-checks
Use the linked manual and spec paths to verify fitment, torque, and service order before teardown.
Related Pages
More resources for this repair
Browse related vehicle pages, model guides, and other oil change resources.
Vehicle hub
2013 Jeep Compass Repair Hub
See all repairs, wiring diagrams, and codes for your 2013 Jeep Compass.
Model cluster
Jeep Compass Guides
Browse all repair guides for the Jeep Compass.
Repair family
All oil change guides
See oil change guides for every vehicle we cover.
More oil change guides
Repair guide
2013 Honda CRV Oil Change
Add more links from symptom hubs, vehicle hubs, and code pages
Repair guide
2012 Ford Fusion Oil Change
Add more links from symptom hubs, vehicle hubs, and code pages
Repair guide
2005 Ford F-150 Oil Change
Add more links from symptom hubs, vehicle hubs, and code pages
Best first step for this repair
Search parts and confirm fitment
Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.
Amazon results open in a new tab so you can keep this repair flow visible.
Confirm engine, trim, and production split before checkout.
Use the warnings and torque notes below as your final pre-order check.
Need the walkthrough?
Open full repair guide
Load the interactive guide only when you want the expanded walkthrough, extra specs, and the vehicle health snapshot.
No signup required. Loads only when requested for a faster first page view.
Start here with the short guide, then open the full version if you need more detail.
At a glance
The core information most people want before deciding whether to do this repair themselves.
DIY parts cost: $25-80
Difficulty
Easy
Time
30-45 minutes
Parts
3 items
Compare costs
Get a vehicle-specific estimate
Safety Warnings
- •Allow engine to cool before starting
- •Properly dispose of used oil at recycling center
- •Do not overtighten drain plug
Tools required
Gather these before you start so the job flows cleanly once the vehicle is apart. Click any tool to shop it on Amazon.
Parts searches: confirm fitment
These links open search results, not a verified parts list. Confirm the part number, engine, trim, and production split before ordering.
We surface the most relevant part number, OEM reference, or spec we have for this job so you can compare listings with higher confidence.
Bundle everything
Shop the complete oil change kit
Pads, rotors, hardware, fluids, and tools — one search for the whole job.
Fastest parts to verify before checkout
Use these quick searches when you want the main replacement item first and the support pieces second.
Engine oil (check owner's manual for type/quantity)
Amazon results for 2013 Jeep Compass Engine oil (check owner's manual for type/quantity)
Open fitment search →When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
What the Pros Prefer: 2013 Jeep Compass Oil Service Workflow
Zero-mess shop procedure, drain plug safety, and filter gasket verification.
Engine Warm-Up & Safe Lift
Shop Tip:Run the engine for 3 to 5 minutes before draining. Warm oil flows much faster and suspends sludge and microscopic carbon particles for a complete drain.
Drain Plug Removal & Crush Washer
Shop Tip:Always replace the crush washer (aluminum or copper). Thread the drain plug in several turns by hand before applying a wrench to eliminate cross-threading.
Oil Filter Spin-Off & Pre-Lube
Shop Tip:Coat the rubber gasket of the new filter with a film of clean motor oil. Hand-tighten until the gasket touches the engine flange, then turn 3/4 turn further—never overtighten with a tool.
Refill & Level Verification
Shop Tip:Pour in 1/2 quart less than specified capacity first. Run engine 60 seconds, shut down on level ground for 3 minutes, then read dipstick to adjust to the top hash mark.
Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases on tool links at no extra cost to you.
Basic procedure overview
This is the short version of the job flow. The AI guide below fills in torque specs, access details, and vehicle-specific cautions.
- 1Lift vehicle and secure on jack stands
- 2Locate and remove drain plug
- 3Drain old oil completely
- 4Replace oil filter
- 5Reinstall drain plug with new washer
- 6Add new oil to specified level
Frequently asked questions
- How much does oil change cost for a 2013 Jeep Compass?
- The general parts estimate shown here is $25-80. It is not a quote for your 2013 Jeep Compass's exact engine or configuration. Confirm the required parts and supplies in the matching manual, compare current prices, and get a written shop estimate that identifies the work and labor included.
- How long does oil change take on a 2013 Jeep Compass?
- A oil change on a 2013 Jeep Compass typically takes 30-45 minutes for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.
- Can I do oil change myself on a 2013 Jeep Compass?
- Yes, a oil change on a 2013 Jeep Compass is rated Easy and is a great beginner DIY project. You'll need basic hand tools and about 30-45 minutes.
- What tools do I need for oil change on a 2013 Jeep Compass?
- For oil change on a 2013 Jeep Compass you'll need: Socket wrench set, Oil filter wrench, Drain pan, Funnel, Jack and jack stands. You'll also need the correct replacement parts: Engine oil (check owner's manual for type/quantity), Oil filter, Drain plug washer.
- What happens if I delay oil change on my 2013 Jeep Compass?
- Delaying an oil change on your 2013 Jeep Compass causes accelerated engine wear, sludge buildup, and reduced fuel economy. Extended neglect can lead to engine seizure and repairs costing $3,000–$7,000+.
- How much oil does a 2013 Jeep Compass take?
- The 2013 Jeep Compass takes 4.5 quarts (4.3 liters) of oil with the filter for both the 2.0L and 2.4L engines. Use 5W-20 meeting Chrysler MS-6395. The 2.4L may also specify 0W-20 on the oil filler cap. The oil filter is a cartridge style accessed from the passenger side of the block with a 24mm socket.
Get the Full AI-Powered Repair Guide
Use the expanded guide alongside the service manual for your 2013 Jeep Compass. Confirm specifications, parts and procedure for your engine before starting.
Unlimited AI repair guides for every vehicle. No signup required. Veteran-owned.