2010 Dodge Challenger Transmission Fluid & Manual Sources
Choose the actual transmission before buying fluid or starting service. Automatic and manual entries are not interchangeable.
Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick answer: identify the transmission first
The hosted SRT-8 Automatic NAG1 Transmission Fill source specifies Mopar ATF+4. It distinguishes fluid/filter service from overhaul or torque-converter work and requires a separate level check. This does not establish the right procedure or quantity for every Challenger.
SRT-8 Automatic NAG1 fill source and level-check referenceSource example: SRT-8 Automatic, NAG1
The hosted fluid/filter service describes pan and filter service, an initial fluid addition, and a separate level check. That initial addition is not a universal final refill quantity or an overhaul capacity.
The linked NAG1 level check uses a running engine and the specified 9336A service dipstick. Its warnings cover unexpected vehicle movement, burns, and hot or rotating parts. Read the complete instructions and safety conditions; do not substitute a generic temperature range or checking method.
The hosted Automatic and Standard quick tables contain mixed automatic and manual rows. A variant name alone does not establish which row applies. Confirm the actual transmission and use its full procedure.
This vehicle's factory manual
2010 Dodge Challenger: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Search after confirming the fluid specification
This search is not a fitment or quantity confirmation. Check the exact licensed specification and product label against the applicable manual before ordering.
Search Amazon for ATF+4 fluidAs an Amazon Associate, AllOEMManuals earns from qualifying purchases.
Frequently asked questions
- Does one fluid procedure cover every 2010 Challenger?
- No. Identify the actual transmission first. The source example here is the SRT-8 Automatic NAG1 section; it is not a manual-transmission procedure or proof of applicability to every Challenger.
- Can I use a quick-table capacity as the amount to add?
- Do not treat service fill, overhaul and dry-fill quantities as interchangeable. The reviewed NAG1 service gives an initial addition followed by its separate level-check procedure. Use the complete applicable source and confirm your actual transmission before filling.