DIY repair guide for 2005 Honda Accord
How to Replace the Starter on a 2005 Honda Accord
How to Replace the Starter on a 2005 Honda Accord. The quick answer is below, then the longer procedure, parts, and factory references.
Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Quick answer
Starter jobs start with the no-crank diagnosis
This page keeps the click/no-crank symptom, battery follow-up, and access steps near the top so owners can decide quickly if the starter is the real problem.
Direct answer
Confirm the starter before you order
2005 Honda Accord starter jobs are usually decided by symptom pattern, battery health, and access path.
- • Starter part: Starter motor
- • Use the click/no-crank symptom before replacing the starter.
- • Check battery condition, wiring connections, and the mounting area first.
- • Plan for under-vehicle access on many layouts and clean the mounting surface for a strong ground.
Before you order
Match the starter fitment and access path
Starter access is labor-heavy on many vehicles, so verifying engine and transmission fitment first saves the most wasted time.
- • Match engine and transmission before checkout.
- • Confirm mounting ear count and electrical terminal layout.
- • Plan access first because this job often starts under the vehicle.
Next step
Keep the battery and charging pages nearby
A weak battery or charging system can mimic a starter problem, so the follow-up pages matter here.
- • Use the battery page if the symptom started after low voltage or a dead battery.
- • Use the alternator page if the charging light or battery warning is part of the story.
This vehicle's factory manual
2005 Honda Accord: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Exact-fit quick check
2005 Accord starter: Mitsuba 1.4kW PMGR, under intake, 17mm bolts
The 2005 Honda Accord (7th generation) with the 2.4L K24A4 4-cylinder mounts the starter motor under the intake manifold on the engine's transaxle side. The 3.0L V6 uses a larger 1.6kW starter in a different location. Access requires removing the air intake duct and resonator box.
2.4L starter: Mitsuba PMGR 1.4kW, 9-tooth pinion; OEM 31200-RAA-A61 or Denso 280-6001
Location: beneath intake manifold, above transmission bellhousing, passenger side of engine bay
Remove air intake resonator and rubber duct: (1) 10mm bolt + hose clamp for access
Electrical: 12mm nut for B+ cable from battery, squeeze-latch S-terminal signal wire
Mounting: upper and lower 17mm bolts thread into transmission bellhousing; long extension required
3.0L V6 starter is 1.6kW, located on driver side, requires different removal path
Exact-fit parts
Parts You'll Need
Vehicle-specific part numbers and quantities pulled from the factory service manual data for this repair.
1.4kW PMGR reman, 2.4L K24 only
12mm copper washer, replace always
Replace if torn during removal
Shop prep
Tools Required
Gather these exact sizes and tools before you start — the manual calls each one out for a reason.
Socket wrench
17mm · Starter mounting bolts
Socket wrench
12mm · B+ terminal nut
Socket wrench
10mm · Air intake resonator bolt
Long extension
3/8 inch x 6 inch · Essential for upper 17mm bolt
Wobble socket
17mm · Helps angle on lower bolt
Safety-critical values
Torque Specifications
These are factory torque values from the OEM service manual. Overtightening can strip threads; undertightening can cause leaks or component failure.
| Component | Torque Value |
|---|---|
| Starter mounting bolts | 32 ft-lb |
| B+ terminal nut | 9 ft-lb |
| Air intake resonator bolt | 7 ft-lb |
Check the procedure for your vehicle
A year and model alone may not identify the correct repair. Match the engine, drivetrain and equipment to the service manual before using the overview below.
Match your vehicle
Check the VIN, engine and drivetrain against the manual. Different configurations can use different components and procedures.
Confirm the service details
Use the matching service procedure for access, fastener specifications and service sequence. General time and cost estimates do not establish applicability.
Manual and spec cross-checks
Use the linked manual and spec paths to verify fitment, torque, and service order before teardown.
Related Pages
More resources for this repair
Browse related vehicle pages, model guides, and other starter replacement resources.
Symptom routing
Priority symptom hubs that lead to this repair
These report-backed symptom hubs are the strongest plain-English entry points into this repair path, related codes, and exact vehicle troubleshooting.
Code reinforcement
Related Trouble Codes
These check engine light codes are often connected to this repair.
Engine Code
P0010: Intake Camshaft Position Actuator Circuit (Bank 1)
Promote from symptom hubs and repair pages
Promote from symptom hubs and repair pages
Engine Code
P0011: Intake Camshaft Position Timing Over-Advanced (Bank 1)
Promote from symptom hubs and repair pages
Promote from symptom hubs and repair pages
Engine Code
P0012: Intake Camshaft Position Timing Over-Retarded (Bank 1)
Promote from symptom hubs and repair pages
Promote from symptom hubs and repair pages
Engine Code
P0013: Exhaust Camshaft Position Actuator Circuit (Bank 1)
Promote from symptom hubs and repair pages
Promote from symptom hubs and repair pages
Best first step for this repair
Check starter fitment now
Starter access is labor-heavy on many vehicles, so verifying engine and transmission fitment first saves the most wasted time.
Match engine and transmission before checkout.
Confirm mounting ear count and electrical terminal layout.
Plan access first because this job often starts under the vehicle.
Need the walkthrough?
Open starter guide with access notes
Use the full guide when you want location details, wiring order, and removal sequence before going under the vehicle.
No signup required. Loads only when requested for a faster first page view.
Start here with the short guide, then open the full version if you need more detail.
At a glance
The core information most people want before deciding whether to do this repair themselves.
DIY parts cost: $100-300
Difficulty
Intermediate
Time
1-2 hours
Parts
2 items
Compare costs
Get a vehicle-specific estimate
Safety Warnings
- •Disconnect battery first
- •Starter may be heavy - support before removing bolts
- •Clean mounting surface for good ground
Tools required
Gather these before you start so the job flows cleanly once the vehicle is apart. Click any tool to shop it on Amazon.
Starter fitment and hardware
Starter part numbers often split by engine, transmission, or drive layout. Double-check those before you order.
We surface the most relevant part number, OEM reference, or spec we have for this job so you can compare listings with higher confidence.
Bundle everything
Shop the complete starter replacement kit
Pads, rotors, hardware, fluids, and tools — one search for the whole job.
Highest-risk starter ordering checks
Match the starter first, then confirm bolts or electrical supplies if corrosion is likely.
Starter bolts (if corroded)
Amazon results for 2005 Honda Accord Starter bolts (if corroded)
Open starter fitment →When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
What the Pros Prefer: 2005 Honda Accord Starter Replacement
Professional 4-step job flow, tool sizes, and certified technician best practices.
Job Preparation & Access Clearance
Shop Tip:Clear dust and road grime from the working area before loosening hardware. Protect eyes and hands from fluids and sharp metal edges.
Fastener Extraction & Component Disassembly
Shop Tip:Apply penetrating spray to heat-cycled or rusted bolts 10 minutes prior to removal. Use 6-point sockets to avoid rounding off bolt heads.
Mating Surface Inspection & Cleaning
Shop Tip:Clean all mounting surfaces to bare metal. Verify that old gaskets, O-rings, and crush washers are fully removed before installing new parts.
Final Torque & Operational Verification
Shop Tip:Torque fasteners to factory OEM specifications in an alternating star or criss-cross pattern to ensure uniform clamping pressure.
Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases on tool links at no extra cost to you.
Basic procedure overview
This is the short version of the job flow. The AI guide below fills in torque specs, access details, and vehicle-specific cautions.
- 1Disconnect battery
- 2Locate starter (usually near transmission)
- 3Remove electrical connections
- 4Remove mounting bolts
- 5Install new starter
- 6Reconnect wiring and battery
Frequently asked questions
- How much does starter replacement cost for a 2005 Honda Accord?
- The general parts estimate shown here is $100-300. It is not a quote for your 2005 Honda Accord's exact engine or configuration. Confirm the required parts and supplies in the matching manual, compare current prices, and get a written shop estimate that identifies the work and labor included.
- How long does starter replacement take on a 2005 Honda Accord?
- A starter replacement on a 2005 Honda Accord typically takes 1-2 hours for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.
- Can I do starter replacement myself on a 2005 Honda Accord?
- A starter replacement on a 2005 Honda Accord is rated Intermediate. If you have some DIY experience and the right tools, you can do it yourself in about 1-2 hours. First-timers should budget extra time and watch a tutorial first.
- What tools do I need for starter replacement on a 2005 Honda Accord?
- For starter replacement on a 2005 Honda Accord you'll need: Socket wrench set, Extensions, Floor jack, Wire brush. You'll also need the correct replacement parts: Starter motor, Starter bolts (if corroded).
- What happens if I delay starter replacement on my 2005 Honda Accord?
- A failing starter means your 2005 Honda Accord won't start reliably. Continued attempts to start with a bad starter can drain the battery and damage the flywheel ring gear—an expensive transmission-area repair.
- Where is the starter on a 2005 Honda Accord 4-cylinder?
- The starter is located under the intake manifold on the passenger side of the 2.4L engine, above the transmission bellhousing. Remove the air intake resonator and duct, then disconnect the 12mm B+ cable and signal wire before removing the upper and lower 17mm mounting bolts.
Get the Full AI-Powered Repair Guide
Use the expanded guide alongside the service manual for your 2005 Honda Accord. Confirm specifications, parts and procedure for your engine before starting.
Unlimited AI repair guides for every vehicle. No signup required. Veteran-owned.