DIY repair guide for 2001 Honda Civic

How to Replace the Water Pump on a 2001 Honda Civic

By Lyndon Bedford•Technical Lead & Founder•Sources and editorial approach•Check exact vehicle applicability

How to Replace the Water Pump on a 2001 Honda Civic. The quick answer is below, then the longer procedure, parts, and factory references.

General repair guidance - An exact factory procedure is not established by this page. Confirm applicability, service steps, and specifications in the manual for your 2001 Honda Civic before working.

Quick answer

Start with the exact fitment check

This page keeps the water pump replacement fitment, timing, and procedure notes close to the top so the vehicle stays in view while you work.

Direct answer

Confirm the repair data before ordering

Check the manual for your 2001 Honda Civic to confirm that this procedure applies to its engine and configuration before ordering parts or starting work.

  • • Difficulty: Advanced
  • • Time: 3-5 hours
  • • Primary part: Water Pump (Match engine family before ordering)
  • • Civic water pump procedure changes drastically by engine - older D/B-series engines are timing-belt driven

Before you order

Use the fitment checks already on this page

Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.

  • • Amazon results open in a new tab so you can keep this repair flow visible.
  • • Confirm engine, trim, and production split before checkout.
  • • Use the warnings and torque notes below as your final pre-order check.

Next step

Keep the exact vehicle hub open

The hub keeps repair, wiring, codes, and manual paths in the same context while you compare the next move.

  • • D16, B-series, and many early 2000s Civic engines use a timing-belt-driven water pump, making this a timing service job
  • • Torque notes: Pump bolts vary by engine - verify in service manual before final tightening
  • • Use the linked manual if you need a factory reference for access or routing.

This vehicle's factory manual

2001 Honda Civic: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Exact-fit quick check

2001 Civic 1.7L D17 Water Pump — OEM 19200-PME-A01

The seventh-gen Civic's 1.7L D17 water pump is tucked behind the timing cover and driven by the timing belt. On this engine, the pump housing bolts to the block with an O-ring seal — no paper gasket.

OEM water pump: Honda 19200-PME-A01; aftermarket: Aisin WPH-802 or GMB 135-2210.

The pump is behind the timing cover — the timing belt must be removed for access.

Pump bolts (3x): 10mm x 1.25 x 45mm; torque to 8.8 ft-lb (106 in-lb) — aluminum threads strip easily.

Replace the O-ring seal: Honda 91305-PNA-003; coat with clean coolant before installation.

Timing belt must be re-tensioned to 33–36 lb-ft at the tensioner bolt after pump installation.

Coolant capacity: 5.2L (5.5 qt); use Honda Type 2 blue coolant 50/50 only.

If the pump weep hole is wet or the bearing grinds, replace immediately — coolant in the timing cover ruins the belt.

Exact-fit parts

Parts You'll Need

Vehicle-specific part numbers and quantities pulled from the factory service manual data for this repair.

Check Amazon
Water pumpQty: 1
Honda 19200-PME-A01 / Aisin WPH-802

Includes O-ring; verify D17 fitment

O-ring sealQty: 1
Honda 91305-PNA-003

Coat with coolant before install

Timing belt kitQty: 1
Aisin TKH-002

Belt, tensioner, idler; mandatory while open

CoolantQty: 2 gallons
Honda OL999-9011 Blue Type 2

50/50 premixed

Crankshaft sealQty: 1
Honda 91214-PME-T01

Replace if leaking behind pulley

Shop prep

Tools Required

Gather these exact sizes and tools before you start — the manual calls each one out for a reason.

Check Amazon

Socket set

10mm, 12mm, 14mm, 17mm, 19mm · For covers, pulleys, and mounts

Crank pulley holder

50mm · Holds harmonic balancer while loosening bolt

Torque wrench

1/4" and 3/8" drive · 8.8 ft-lb pump; 33 ft-lb tensioner

Drain pan

3-gallon · For 5.5 qt coolant capacity

Gasket scraper

Plastic razor · Clean O-ring groove without scoring

Safety-critical values

Torque Specifications

These are factory torque values from the OEM service manual. Overtightening can strip threads; undertightening can cause leaks or component failure.

ComponentTorque Value
Water pump bolts (10mm)8.8 ft-lb
Timing belt tensioner bolt33 ft-lb
Crank pulley bolt (19mm)134 ft-lb
Water pump bolts (10mm): 3 bolts; aluminum block threads
Timing belt tensioner bolt: D17A1 tensioner pivot
Crank pulley bolt (19mm): Use impact or pulley holder

Check the procedure for your vehicle

A year and model alone may not identify the correct repair. Match the engine, drivetrain and equipment to the service manual before using the overview below.

Match your vehicle

Check the VIN, engine and drivetrain against the manual. Different configurations can use different components and procedures.

Confirm the service details

Use the matching service procedure for access, fastener specifications and service sequence. General time and cost estimates do not establish applicability.

Manual and spec cross-checks

Use the linked manual and spec paths to verify fitment, torque, and service order before teardown.

Related Pages

More resources for this repair

Browse related vehicle pages, model guides, and other water pump replacement resources.

Symptom routing

Priority symptom hubs that lead to this repair

These report-backed symptom hubs are the strongest plain-English entry points into this repair path, related codes, and exact vehicle troubleshooting.

Diagnose from symptom

Code reinforcement

Related Trouble Codes

These check engine light codes are often connected to this repair.

Browse all codes

Best first step for this repair

Search parts and confirm fitment

Confirm that the procedure applies to your engine and configuration in the matching manual, then use the parts searches if you need supplies.

Amazon results open in a new tab so you can keep this repair flow visible.

Confirm engine, trim, and production split before checkout.

Use the warnings and torque notes below as your final pre-order check.

Need the walkthrough?

Open full repair guide

Load the interactive guide only when you want the expanded walkthrough, extra specs, and the vehicle health snapshot.

No signup required. Loads only when requested for a faster first page view.

Vehicle-specific notes and part numbers are already on this page.

At a glance

The core information most people want before deciding whether to do this repair themselves.

DIY parts cost: $80-250

Difficulty

Advanced

Time

3-5 hours

Parts

3 items

Compare costs

Get a vehicle-specific estimate

2001 Honda Civic — What You Need to Know

  • •D16, B-series, and many early 2000s Civic engines use a timing-belt-driven water pump, making this a timing service job
  • •R18 Civics use a different front cover layout, so do not assume all Civic pumps swap the same way
  • •Persistent overheating after pump replacement usually means trapped air or a thermostat issue, not a bad new pump
  • •Use Honda Type 2 coolant to avoid gasket and corrosion problems in the aluminum block and head
Torque specs

Pump bolts vary by engine - verify in service manual before final tightening

Safety Warnings

  • •Civic water pump procedure changes drastically by engine - older D/B-series engines are timing-belt driven
  • •On timing-belt Civics, replace the timing belt and tensioner at the same time
  • •Do not reuse old coolant if it is contaminated or rusty

Tools required

Gather these before you start so the job flows cleanly once the vehicle is apart. Click any tool to shop it on Amazon.

Drain pan
Shop
Socket set
Shop
Pulley puller
Shop
Torque wrench
Shop
RTV sealant
Shop

Parts searches: confirm fitment

These links open search results, not a verified parts list. Confirm the part number, engine, trim, and production split before ordering.

We surface the most relevant part number, OEM reference, or spec we have for this job so you can compare listings with higher confidence.

Water PumpMatch engine family before ordering
Aisin / Gates equivalent
Check fitment on Amazon
Timing belt kit or drive belt hardwareVaries by engine and generation
Check fitment on Amazon
Honda Type 2 coolantPremixed blue coolant
See supporting supplies

Bundle everything

Shop the complete water pump replacement kit

Pads, rotors, hardware, fluids, and tools — one search for the whole job.

Shop complete kit

Fastest parts to verify before checkout

Use these quick searches when you want the main replacement item first and the support pieces second.

Search full repair parts

Water Pump

Match engine family before ordering

Open fitment search →

Timing belt kit or drive belt hardware

Varies by engine and generation

Open fitment search →

Honda Type 2 coolant

Premixed blue coolant

Open fitment search →

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.
Professional Workshop Workflow4-Step Standard

What the Pros Prefer: 2001 Honda Civic Water Pump Workflow

Controlled coolant capture, mating surface prep, and cooling system purging.

Master Tech Rule:Never use steel razor blades or aggressive rotary wire wheels on soft aluminum engine blocks to remove old gasket material. Gouging the aluminum creates microscopic channels that cause permanent, unfixable coolant leaks.
1

Pulley Bolt Pre-Loosening & Coolant Drain

Tool Specification: 10mm / 12mm Wrench & Large Drain Pan

Shop Tip:Loosen the water pump pulley mounting bolts 1 turn while the serpentine belt is still under full tension. The belt grip prevents the pulley from spinning freely in your hand.

2

Pump Extraction & Catch Pan Placement

Tool Specification: Metric 6-Point Socket Set & Ratchet

Shop Tip:Place your drain bucket directly beneath the pump before unbolting. Significant trapped coolant remains behind the pump cavity even after draining the radiator.

3

Mating Surface Decontamination

Tool Specification: Plastic / Brass Razor Blade Scraper & Brake Cleaner

Shop Tip:Scrape all residual paper and dried RTV until the aluminum surface is clean, smooth, and dry. Wipe with brake cleaner so the new gasket bonds flat.

4

Torque Pattern & Air Bleed Funnel

Tool Specification: 1/4" Drive Torque Wrench (in-lbs) & Burp Funnel

Shop Tip:Small M6 and M8 water pump bolts have low torque ratings (7–15 lb-ft). Overtightening snaps bolts in the block. Use a spill-free funnel to purge air pockets on refill.

Affiliate disclosure: As an Amazon Associate, we earn from qualifying purchases on tool links at no extra cost to you.

Basic procedure overview

This is the short version of the job flow. The AI guide below fills in torque specs, access details, and vehicle-specific cautions.

  1. 1Identify the engine code before ordering parts and beginning teardown
  2. 2Drain the cooling system and remove the necessary covers or accessory belt hardware
  3. 3If timing-belt driven, set engine timing marks before removing the belt
  4. 4Remove the old pump, clean the mounting surface, and install the new pump with the correct gasket or O-ring
  5. 5Reassemble timing or accessory components, refill with Honda coolant, and bleed the cooling system fully

Frequently asked questions

How much does water pump replacement cost for a 2001 Honda Civic?
The general parts estimate shown here is $80-250. It is not a quote for your 2001 Honda Civic's exact engine or configuration. Confirm the required parts and supplies in the matching manual, compare current prices, and get a written shop estimate that identifies the work and labor included.
How long does water pump replacement take on a 2001 Honda Civic?
A water pump replacement on a 2001 Honda Civic typically takes 3-5 hours for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.
Can I do water pump replacement myself on a 2001 Honda Civic?
Difficulty varies depending on your 2001 Honda Civic's specific configuration. With the right tools and a service manual, most handy owners can complete this in 3-5 hours.
What tools do I need for water pump replacement on a 2001 Honda Civic?
For water pump replacement on a 2001 Honda Civic you'll need: Drain pan, Socket set, Pulley puller, Torque wrench, RTV sealant. You'll also need the correct replacement parts: Water Pump (Match engine family before ordering), Timing belt kit or drive belt hardware (Varies by engine and generation), Honda Type 2 coolant (Premixed blue coolant).
What happens if I delay water pump replacement on my 2001 Honda Civic?
A failing water pump will cause your 2001 Honda Civic to overheat. Continued driving with a bad water pump can warp the cylinder head or blow the head gasket—repairs that cost $1,500–$3,000+.
Do you have to remove the timing belt to change the water pump on a 2001 Honda Civic?
Yes. The 1.7L D17 water pump is mounted behind the lower timing cover and driven by the timing belt. You must remove the crank pulley, covers, and belt to access the three 10mm pump bolts. Always replace the timing belt and tensioner while you're in there.
100% Free

Get the Full AI-Powered Repair Guide

Use the expanded guide alongside the service manual for your 2001 Honda Civic. Confirm specifications, parts and procedure for your engine before starting.

Unlimited AI repair guides for every vehicle. No signup required. Veteran-owned.

Enhancing with AI...
Repair GuidanceID: _R_GOAV5UBSNPFIV9DB_

Confirm the steps and specifications in the manual for your exact vehicle before proceeding.

Honda Civic water pump replacement

2001 Honda Civic

Critical Safety Protocols

  • Civic water pump procedure changes drastically by engine - older D/B-series engines are timing-belt driven
  • On timing-belt Civics, replace the timing belt and tensioner at the same time
  • Do not reuse old coolant if it is contaminated or rusty

Shop Parts

Search retailers for parts and confirm fitment before ordering.

3 Parts Needed
Retailer links open searches. Availability and shipping vary by product.

As an Amazon Associate, AllOEMManuals earns from qualifying purchases.

Engine|#1

Water Pump (Match engine family before ordering)

Engine|#2

Timing belt kit or drive belt hardware (Varies by engine and generation)

Fluids|#3

Honda Type 2 coolant (Premixed blue coolant)

Can't find what you need? Browse full catalogs:

Search Amazon for vehicle parts

Required Tools

Repair Procedure

5 STEPS
1Step 1

Action

Identify the engine code before ordering parts and beginning teardown

Step 1
2Step 2

Action

Drain the cooling system and remove the necessary covers or accessory belt hardware

Step 2
3Step 3

Action

If timing-belt driven, set engine timing marks before removing the belt

Step 3
4Step 4

Action

Remove the old pump, clean the mounting surface, and install the new pump with the correct gasket or O-ring

Step 4
5Step 5

Action

Reassemble timing or accessory components, refill with Honda coolant, and bleed the cooling system fully

Step 5

About Water pump replacement on Honda Civic

Before starting water pump replacement on your 2001 Honda Civic, check the matching service procedure and the equipment it requires. Compare the cost of the correct parts, supplies and any additional tools with a written shop estimate.

The Honda Civic has been in production for many years, and water pump replacementprocedures are well-documented. Always refer to your owner's manual for vehicle-specific information and torque specifications.

Where to Buy Parts

We recommend purchasing parts through Amazon for fast Prime shipping, competitive prices, and easy returns. All part links include your vehicle fitment information for accurate results.

Vehicle Resources

Follow the strongest internal paths from this repair into manuals, year indexes, and related spec pages.

Related Resources

Symptom guides, factory manuals, specs, wiring diagrams, and trouble codes related to this repair.

More exact repair paths for your Honda Civic

Likely code clusters for this vehicle

Water pump replacement Guides for Other Vehicles