Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2025 Volvo XC60 PHEV T8 CoreFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | PHEV T8 Core,PHEV T8 Plus,PHEV T8 Polestar,PHEV T8 Ultra,PHE | 4.06 OZS. | 0.12 L | PAG SP-A2 | Approximate capacity. | S | |
| Air Cond Refrigerant | N/A | N/A | R-1234yf | For further details see "Air conditioner specification label". | S | ||
| Automatic Transmission Fluid | PHEV T8 Core,PHEV T8 Plus,PHEV T8 Polestar,PHEV T8 Ultra,PHE | N/A | N/A | Transmission Fluid AW-1 | Under normal driving conditions the transmission oil does not need changing during its service life. However, it may be necessary under adverse driving conditions. | S | |
| Brake Fluid | N/A | N/A | VOLVO Original or similar fluid that meets a combination of DOT 4, 5.1 and ISO 4925 class 6. | S | |||
| Engine Coolant | N/A | N/A | 50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water | The level should not exceed the yellow MAX mark inside the expansion tank. | S | ||
| Engine Oil | PHEV T8 Core,PHEV T8 Plus,PHEV T8 Polestar,PHEV T8 Ultra,PHE | w/Filter | 5.92 QTS. | 5.6 L | VCC C6SP SAE 0W-20 | VOLVO recommends Castrol Edge Professional engine oil. This vehicle comes from the factory with synthetic oil. | S |
| Windshield Washer Fluid | w/Headlight washer | 5.60 QTS. | 5.29 L | Washer antifreeze recommended by VOLVO, mixied with water | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
| Windshield Washer Fluid | w/o Headlight washer | 3.70 QTS. | 3.5 L | Washer antifreeze recommended by VOLVO, mixied with water | Follow the Manufacturer's Instructions for the mixture ratio. | S | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.