2021 Volvo XC60 T5 R-Design, AWDFACTORY OEM SERVICE PROCEDURE

Cell Module E: Notes

NOTE: For information on Volvo color coded illustrations, refer to: IMAGES .
SPECIAL TOOLS

GLL1041766Courtesy of VOLVO CARS CORPORATION
981 4135 Gloves 
Tool number:  981 4135
Tool description:  Gloves
Tool boards:  EU99
GLL1055658Courtesy of VOLVO CARS CORPORATION
981 5250 Face shield 
Tool number:  981 5250
Tool description:  Face shield
Tool boards:  EU99
GLL1048847Courtesy of VOLVO CARS CORPORATION
999 5919 PULLER (SEAL-PINION, CAM-CRANKSHAFT) B200-6304 
Tool number:  999 5919
Tool description:  PULLER (SEAL-PINION, CAM-CRANKSHAFT) B200-6304
Tool boards:  46
GLL169656Courtesy of VOLVO CARS CORPORATION
999 7390 Key 
Tool number:  999 7390
Tool description:  Key
Tool boards:  80
GLL1040041Courtesy of VOLVO CARS CORPORATION
951 2578 Plug kit in bag 
Tool number:  951 2578
Tool description:  Plug kit in bag
Tool boards:  20
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.