2021 Volvo S90 T6 InscriptionFACTORY OEM SERVICE PROCEDURE

Remote Key [2017-2022]: Description

The remote key is used to remotely activate functions in the vehicle.

The remote key has buttons for activating the following functions:

  • Locking via the central locking system.
  • Unlocking via the central locking system.
  • Unlocking the tailgate, unlocking and opening the tailgate (only vehicle ' s with power operated tailgate).
  • Activate alarm functions.

The embedded transponder in the key is a communication circuit with a unique programmed identification which must be learned by the Central Electronic Module (CEM) in order to authenticate the key. Once the transponder has been programmed for one vehicle, it cannot be programmed for another. If a key is lost, a new one can be programmed for the vehicle.

The remote key can sense when its battery is starting to run out and a message will inform the driver in the combined instrument when the battery needs to be replaced. Reduced range of the remote key can also be an indication that the battery will need to be replaced.

The key has a retracted key blade which can be used in emergency situations to unlock the driver's door. This does not disarm alarm functions.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.