Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Volvo S60 Cross CountryFACTORY OEM SERVICE PROCEDURE
Auto Stop
When the driver stops the vehicle at, for example, a red light, depresses the clutch pedal, shifts the gear lever into neutral and releases the clutch pedal, the system requests autostop of the engine.
- The clutch pedal is depressed.
- The vehicle is braked to 0 km/h.
- The gear level in neutral position.
- The clutch pedal released.
- Secondary battery relay (2) is not activated and is in normal position (open).
- The secondary battery (1) is not connected.
- The battery relay (main battery) (4) is not activated and is in normal position (closed).
- The vehicle is powered from the battery (main battery) (6).
- The starter motor is not activated and the starter motor relays (5) are in normal position.
- The battery diode (3) does not fulfil any function in this mode.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.