2016 Volvo XC60 T6 R-DesignFACTORY OEM SERVICE PROCEDURE

Component Location, Transmission Control Module (TCM)

GLL1018064Courtesy of VOLVO CARS CORPORATION
  1. Transmission Control Module (TCM)
  2. Control system
  3. Transmission Control Unit Wiring Harness
  4. Oil temperature sensor
  5. Linear pressure solenoid SL1
  6. Shift solenoid S1
  7. Transmission output speed sensor
  8. Linear pressure solenoid SL4
  9. Linear pressure solenoid SL5
  10. Lock-up solenoid SLU
  11. Shift solenoid S2
  12. Linear pressure solenoid SL2
  13. Linear pressure solenoid SL3
  14. Transmission input speed sensor
  15. Linear pressure solenoid SLT
  16. Electromagnetic oil pump EMOP (not present on hybrid vehicles)
  17. Electric oil pump EOP (only present on hybrid vehicles)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.