Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Front Lighting
- Fog lamps
- Motor, headlamp range adjustment
- Side turn signal flashers
- Sidemarker lamps
- Low beam
- Parking lamps
- Turn signal lamps
- High beam.
Front lighting
Unique to this design is that the entire headlamp housing can be removed. The entire headlamp housing is removed to replace the headlamp and bulbs.
- The lens is made of clear plastic
- There are separate reflectors for high and low beam
- Integrated turn signal lamps and parking lamps
- Headlamp range adjustment is as before.
Bi-xenon
Available as a factory option.
Fog lamps
Positioned in the bumper.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.